- Phone
-
Address
Building 1, Optics Valley Science and Technology Port, Wuhan New Technology Development Zone
Product Categories
Wuhan Junwei Technology Co., Ltd
POE Hot Melt Adhesive Film Jiuyao Selection
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
After verification by the R&D department of Wuhan Jiuyao Optoelectronics Technology Co., Ltd., the perovskite module can pass the IEC61215 standard wet heat aging test by using the butyl tape+POE double glass packaging. The efficiency degradation of the module after 1000 hours of aging at 85 ℃ and 85% RH can be ignored. Using appropriate hot pressing pressure, temperature, and duration can avoid efficiency losses caused by packaging.
Product Details
1、 Product Introduction:
Perovskite specificPOEEncapsulation film, suitable for packaging double glass perovskite solar cell modules, selected high-quality supplier products, with lower lamination temperature（120℃), long-term weather resistance without the release of acidic molecules.
Performance: Compared toEVAAdhesive film,POEThe adhesive film has superior aging resistance, low water vapor transmission rate, and resistance toPIDPerformance, its water vapor transmission rate is onlyEVAThe adhesive film1/8Left and right, andPOEThe adhesive film does not decompose and produce acetic acid. Studies have shown that,EVAThe release of acetic acid molecules is causingEVANot applicable to perovskite solar cells.
Specifications0.75±0.05mnmmthicknessA4Format, other sizes can be customized.
Packaging appearance: Aluminum plastic vacuum packaged and stored inN2In the glove box.
Instructions for use: Use a vacuum laminator or hot press machine to110-125Hot pressing at ℃10-20minCut and use after opening, and put the remaining part back into the waterless glove box (or ultra-low humidity drying cabinet) as soon as possible,POEIt has the ability to self absorb water, but exposure to the atmosphere can absorb moisture and affect the stability of the packaged components.
2、 Quality inspection information:
Finished Product Inspection Report (provided by the supplier)
IIIReferences
fourProducteffect verification：
Verified by the R&D department of Wuhan Jiuyao Optoelectronics Technology Co., Ltd., this butyl tape is used+POEAfter being encapsulated in double glass, perovskite components can pass throughIEC61215Standard Damp Heat Aging Test,85℃ and85%RHaging1000The efficiency degradation of hourly components can be ignored. Using appropriate hot pressing pressure, temperature, and duration can avoid efficiency losses caused by packaging.
