PMQ-1II physical simulation experimental device for foam flooding

PMQ-1II physical simulation experimental device for foam floodingVarious displacement tests can be carried out: displacement tests of various injectants (water, polymer, foam, gas, etc.) using single tube homogeneous model and double tube heterogeneous model, displacement tests of water drive oil, chemical drive oil, foam drive oil, miscible drive oil, CO2 drive oil, N2 drive oil, natural gas drive oil, etc.

Water sensitivity, speed sensitivity, salt sensitivity, acid sensitivity, alkali sensitivity, forward and reverse flow, volume flow rate, injection series of fluids, etc.

Determination of foam resistance coefficient and residual resistance coefficient.

Determination of apparent viscosity.

PMQ-1II physical simulation experimental device for foam floodingMain performance indicators:

Displacement pressure: 40MPa

Ring pressure: 50MPa

Displacement flow rate: 0.01-25mL/min

Working temperature: Room temperature~150 ℃

Temperature control accuracy ± 1 ℃

Core clamp: 45 × 45 × 300mm, adjustable length

φ 25 × 1000mm, evenly distributed with three pressure measuring holes

Sand filling model tube: φ 38 × 1000mm, three measuring points

φ 38 × 300mm, filled with quartz sand inside