- Phone
-
Address
Shanghai
Product Categories
Shanghai Suman Electromechanical Equipment Co., Ltd
P+F Single Loop Value Encoder FSS58, imported from Germany
NegotiableUpdate on 05/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
P+F Single Loop Value Encoder FSS58 Imported from Germany $r $n Single Loop Value Encoder FSS58 $r $n Industrial Standard Shell 58 mm $r $n13 bits, single turn $r $n output code: Gray code and binary code $r $n push-pull output with short-circuit protection $r $n used to select counting direction, LATCH and PRESET input $r $n code change frequency up to 400 kHz $r $n embedded hollow shaft
Product Details
P+F Single Loop Value Encoder FSS58, imported from Germany：
Functional safety related parameters
MTTFd 120 a
Task Time (TM) 20 a
L10 1,9 E+11 at 6000 rpm and 20/40 N axial/radial axis load
Diagnostic coverage rate (DC) 0%
Electrical Technical Specifications
Working voltage 10 .. 30 V DC
The no-load current is 140 mA
Power consumption ≤ 2 W, no output driver
Linearity ± 0.5 LSB
Output Gray Code, Binary Code, and Gray Residual Code
Code course increases clockwise (clockwise rotation increases code course)
Code preparation time 0.3 ms
interface
Interface type push-pull, parallel, short circuit protection
resolution
Single loop 13 bit
Load current 20 mA
Voltage drop ≤ 2.5 V
Signal voltage
High working voltage negative pressure drop
Low ≤ 2,8 V
Rise time 300 ns
Power outage delay of 300 ns
Code change frequency 400 kHz
Enter 1
Input type: Select counting direction (clockwise/counterclockwise)
Signal voltage
High 10 .. 30 V
Low 0 .. 2 V
Input current<6 mA
Connection delay ≥ 1 ms
Disconnecting delay ≥ 1 ms
Enter 2
Temporary Storage of Input Types (LATCH)
Signal voltage
High 10 .. 30 V
Low 0 .. 2 V
Input current<6 mA
Connection delay<0.1 ms
Disconnecting delay<0.1 ms
Enter 3
Input Type Zero Position Adjustment (PRESSET)
Signal voltage
High 10 .. 30 V
Low 0 .. 2 V
Input current<6 mA
Connection delay<1 ms
connection
Connector type 9424 (M23), 19 pin
Cable ∅ 9 mm, 12 x 2 x 0.14 mm2, 2 m
meet the standard
Protection level DIN EN 60529, IP65
Climate test DIN EN 60068-2-3, no condensation
Emission interference EN 61000-6-4:2007
Immunity EN 61000-6-2:2005
Impact resistance DIN EN 60068-2-27100 g, 6 ms
Vibration resistance DIN EN 60068-2-6, 10 g, 10... 2000 Hz
Certification and Credentials
UL certification, cULus certification, general purpose, Class 2 power supply
environmental conditions
Working temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)
Cable model:
-30 . 70 ° C (hard wire)
-5 . 70 ° C (flexible cord)
Storage temperature -40 degrees Celsius 85 ° C (-40... 185 ° F) (Cable model: -5 ..70 °C）
Mechanical Specifications
material
Combination 1 shell: Aluminum with powder coating
Flange: Aluminum
Shaft: Stainless steel
Combination 2 (Inox) shell: stainless steel
Flange: Stainless steel
Shaft: Stainless steel
Mass approximately 200 g (combination 1)
Approximately 400 g (combination 2)
Rotating speed of 12000 min-1
Inertia moment 30 gcm2
Initial torque ≤ 5 Ncm
P+F Single Loop Value Encoder FSS58, imported from Germany
Similar Product Recommend
