P+F Single Loop Value Encoder EVS58-PN Original from Germany

P+F Single Loop Value Encoder EVS58-PN Original from Germany：

Detection type: photoelectric sampling

Equipment type: Single coil value encoder

UL document number E223176 "For NFPA 79 applications only", if the product is marked with the UL mark.

Functional safety related parameters

MTTFd 130 a

Task Time (TM) 20 a

L10 1,9 E+11 at 6000 rpm and 20/40 N axial/radial axis load

Diagnostic coverage rate (DC) 0%

Electrical Technical Specifications

Working voltage 10 .. 30 V DC

High power consumption of 4 W

Linearity ± 0.5 LSB (12 bits)

Output code binary code

The code course (counting direction) is programmable,

Clockwise increment (clockwise rotation, code course increment)

Clockwise decrease (clockwise rotation, code course decreases)

interface

Interface type PROFINET IO

resolution

Up to 16 bits per cycle

The overall solution can reach 16 bits

Physical Ethernet

Transmission rate of 100 MBit/s

Cycle time ≤ 1 ms (IRT); ≤ 10 ms (RT)

connection

Connector Ethernet: 2 sockets M12 x 1, 4-pin, D code

Power supply: 1 plug M12 x 1, 4-pin, size A

meet the standard

Protection level DIN EN 60529,

Shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)

Shell side: IP65

Stainless Steel Type (INOX): * Meets IP67

Climate test DIN EN 60068-2-3, no condensation

Emission interference EN 61000-6-4:2007

Immunity EN 61000-6-2:2005

Impact resistance DIN EN 60068-2-27100 g, 6 ms

Vibration resistance DIN EN 60068-2-6, 10 g, 10... 2000 Hz

Certification and Credentials

UL certification cULus certification, general purpose, Class 2 power supply, if the product is marked with the UL mark.

environmental conditions

Working temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)

Storage temperature -40 degrees Celsius .. 85 °C (-40 ... 185 °F)

Mechanical Specifications

Material shell: Aluminum with powder coating

Flange: Aluminum

Shaft: Stainless steel

Combination 1 shell: Aluminum with powder coating

Flange: Aluminum

Shaft: Stainless steel

Combination 2 (Inox) shell: Stainless steel 1.4305/AISI 303

Flange: Stainless steel 1.4301/AISI 304

Shaft: Stainless steel 1.4305/AISI 303

Mass approximately 370 g (combination 1)

Approximately 840 g (combination 2)

Rotating speed of 12000 min-1

Inertia moment 30 gcm2

Initial torque ≤ 3 Ncm (models without shaft seals)

Axis load

Axial 40 N

Radial 110 N

P+F Single Loop Value Encoder EVS58-PN Original from Germany