Welcome Customer !

Membership

Help

Ningxia Nuoke Yinfeng Intelligent Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Ozone detector for sewage treatment

NegotiableUpdate on 01/30
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The Huiruipu HRP-T1000 sewage treatment ozone alarm can convert the concentration signal of argon gas in the air into an electrical signal for display and remote transmission. It adopts a three wire 4-20mA or four bus RS485 output mode, and has the characteristics of long transmission distance and good anti-interference performance.
Product Details

The bactericidal effect of ozone mainly depends on the content of ozone in water. The higher the ozone content in water, the better the sterilization effect. The concentration of ozone in water depends on the concentration of ozone gas entering the water, water temperature, and the degree of dispersion of ozone in the water. The higher the concentration of ozone gas introduced and the lower the water temperature, the higher the dispersion of ozone in the water. The more thorough the mixing of ozone and water, the higher the ozone content in the water, and the better the sterilization effect naturally.

Huiruipu HRP-T1000Ozone detector for sewage treatmentIt can convert gas concentration signals in the air into electrical signals for display and remote transmission. It adopts a three wire 4-20mA or four bus RS485 output mode, and has the characteristics of long transmission distance and good anti-interference performance.Huiruipu Ozone AlarmWidely used for disinfection and sterilization in food factories, cosmetics factories, pharmaceutical factories, edible mushroom cultivation, libraries, hospitals and other spaces, disinfection, decolorization and degradation of COD in water bodies such as purified water, bottled water, tap water, industrial wastewater, swimming pool water, hospital wastewater, reclaimed water and aquaculture water, chemical oxidation, drug synthesis, and denim washing decolorization and aging.

Argon concentration alarmparameter

1. Working principle: diffusion type

2. Electrical interface: Left G1/2, Right M20 * 1.5

3. Explosion proof rating: Ex d IIC T6 Gb

4. Protection level: IP65

5. Output signal: 4-20mA three wire system/RS485 four wire system or two-wire system

6. Power supply voltage: DC24V

7. Power consumption:<5W

8. Accuracy: ± 3% F.S

9. Output indicator: digital display/LCD display/no display

10. Humidity: 0-95% RH

11. Response time: T90 ≤ 30s

12. Switching signal: 1 (default passive output)

13. Monitor: DCS, PLC

14. Exterior dimensions: 210mm * 190mm * 95mm

15. Weight: 1.2kg

Ozone detectorCommon faults?

1. The alarm has no display. Cause analysis: Abnormal power supply voltage; Water ingress into the header; Circuit board malfunction. Solution: Check insurance and wiring; Clean and dry the circuit board, and replace it if necessary; Replace with a new circuit board or a new meter.

2. The alarm sounded incorrectly. Cause analysis: The probe or alarm is aging. Solution: Re calibrate, replace the probe, or replace the alarm.

3. The concentration indicator does not return to zero. Cause analysis: zero drift; There is residual combustible gas in the probe cover; Probe aging. Solution: Calibrate the zero point in clean air; Dismantle the probe cover and clean the dust accumulation on the probe; Replace the probe or instrument.

4. The concentration display value has a large deviation. Reason analysis: The sample gas concentration did not meet the requirements during calibration; Probe aging. Solution: Use qualified sample gas to recalibrate; Replace the probe with a new one;

5. The displayed value during calibration is not within the range of ± 5% LEL of the standard value. Reason analysis: The flow rate during calibration is too high or too low; The sample gas has expired; Probe aging; Solution: Adjust the flow rate to 0.2-0.4L/min again; Use qualified sample gas; Replace the probe with a new one; The various issues that arise during the use of combustible gas alarms cannot be ignored, as any small problem in our eyes can lead to fatal tragedies.

Zhengzhou Huiruipu is a professional manufacturer specializing in gas detection alarms, flammable, explosive, toxic and harmful gas detection alarm equipment. It is a company that integrates research and development, design, production, manufacturing, sales and service. The company is committed to becoming a professional supplier of on-site detection instruments and system solutions in China. Technological innovation is the inexhaustible driving force for the continuous development of Zhengzhou Huiruipu. Only innovation can seize the opportunity in fierce competition, win the initiative, and maintain strong vitality in the wave of constantly upgrading new technologies and products.