Original factory stock plunger pump plunger PE6 from Hawe, Germany

NegotiableUpdate on 05/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PE8HAWEPE10 original factory spot plunger pump plunger PE6 Hawe, Germany: $r $n It is the standard plunger unit (pump core/pump component) of the Hawe valve matched radial plunger pump in Germany, specially designed for R series and other high-pressure radial plunger pumps, and is the core precision component of high-pressure hydraulic systems.

Product Details

PE8HAWEPE10Original factory stock plunger pump plunger PE6 from Hawe, Germany

It is the standard plunger unit (pump core/pump component) of HAWE valve matched radial piston pump in Germany, specially designed for R series and other high-pressure radial piston pumps, and is the core precision component of high-pressure hydraulic systems.

PE: Series code, valve controlled plunger components specifically designed for radial piston pumps; 6 is the size/displacement level

Structure: Valve equipped single column plug assembly (including plunger, cylinder liner, suction and discharge valve group, pre tensioning spring); Fully hardened high-precision steel, surface treated with nitriding/honing; Modular design, capable of combining multiple units in a star/ring shape to form a multi plunger pump

Core technical parameters

Maximum working pressure: 700 bar (the core advantage of high-pressure working conditions, far exceeding ordinary axial piston pumps)

Displacement: 1.52 cm ³/rev; At 1450 rpm, the flow rate is about 2.2 L/min, and at 2850 rpm, it is about 4.2 L/min

Medium and temperature: Mineral hydraulic oil is the main component; Medium temperature -25 ℃ to+80 ℃; Environmental temperature -40 ℃ to+80 ℃

Sealing: FKM main seal, oil resistant, high temperature resistant

Accuracy: The clearance between the plunger and cylinder liner is controlled in micrometers, and the volumetric efficiency is ≥ 95% at rated pressure

Installation: Can be installed at any angle, the suction port must bewan quanImmerse the oil surface to prevent air intake

Applicable hosts and scenarios

HAWE PE6 is a component plunger produced by HAWE Hydraulic in Germany, which is used to match the R and RG series radial piston pumps. 1、 Working principle: The plunger pump relies on the reciprocating motion of the plunger in the cylinder body to seal the working chamber.

characteristic

High efficiency: It can effectively achieve energy conversion, improve the working efficiency of hydraulic systems, and reduce energy loss.

Compact structure: Small in size, occupying less space, easy to install and integrate into various hydraulic equipment, which is conducive to the miniaturization and lightweight of the equipment.

Multiple pressure output terminals: up to 14 independent pressure output terminals can be provided to meet the pressure requirements of different hydraulic circuits, providing more flexibility for system design.

Modularity: It can be provided as a pumping station with valve groups from modularity, making it convenient for users to combine and configure according to actual needs, and shortening the design and installation cycle of the system.

PE8HAWEPE10Original factory stock plunger pump plunger PE6 from Hawe, Germany