Original Siemens 6SE7090-0XX84-1CE0 IMPI Fiber Optic Board

Original Siemens 6SE7090-0XX84-1CE0 IMPI Fiber Optic BoardagentOriginal Siemens 6SE7090-0XX84-1CE0 IMPI Fiber Optic Boardagent

6SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG16SE7090-0XX84-1CG1

Display and Diagnosis

• Use LED indicator lights to display operational status and errors

• 3 measuring sockets

• Repair switch and mode selection switch

• Diagnostic button

Built in I/OSiemens purchasing agent

• 5-point digital input

• 8-point digital input/output (up to 8 points for cam output or up to 8 points for measurement input)

• 3-point fault safety dual channel input (F-DI); Can also be used as 6 DI

• 1-point fault safety output (F-DO); Can also be used as 1 DO

• 1-point analog input (can be ± 10 V or ± 20 mA)

communication

• 1 x DRIVE-CLiQ

• 1 x PROFINET IO (1 interface with 2 ports, D410-2 DP/PN only)

• 1 x PROFIBUS DP（(D410-2 DP：2 × PROFIBUS DP）

data backup

• 1 SIMOTION CF card slot

other interfacesSiemens purchasing agent

• 24V circuit power terminal

• 1-point encoder input, used for

• HTL/TTL incremental encoder

• SSI absolute value encoder (without incremental signal)

• 1-point temperature sensor input (KTY84-130 or PTC)

• The PM IF interface (power module interface) on the back is used to directly connect the modular SINAMICS S120 PM240-2 or PM340 power module

Assembly/Installation

SIMOTION D410-2 can be directly plugged into the modular SINAMICS S120 power module.

Alternatively, SIMOTION D410-2 can be installed on a mounting board (to be ordered separately) and connected to the power module via DRIVE CLiQ. In this case, the CUA31/CUA32 control unit adapter must be connected to the power module. SIMOTION D410-2 can only connect to one control unit adapter.

Siemens 840D Machine Tool MCP AgentWhen connecting the power module through CUA31/CUA32, the safety integration extension function cannot be used through the built-in terminals (F-DI, F-DO).

The AC/AC device type power module is connected to SIMOTION D410-2 through the DRIVE CLiQ interface. The book type inverter unit cannot be connected to SIMOTION D410-2.

The SIMOTION D410-2 installed on the mounting board can also operate without using a power module, for example

• In hydraulic applications, TM31 is used for analog input and analog output

• Used for connecting drivers with analog ± 10 V setpoint interface (IM 174/ADI 4)

Data storage/data backup

The SIMOTION D410-2 control unit will store persistent process data in a maintenance free manner (see technical data for required memory size). The real-time clock will be backed up for several days through SuperCap.

The system software, user data, and user programs are all backed up on the SIMOTION CF card. The retention process data of the control unit can also be stored on this CF card through system commands, such as when spare parts are needed.

Connectable I/O

PROFINET IO：(D410-2 DP/PN only)

• Certified PROFINET devices

• Distributed SIMATIC ET 200S/SP/M/MP/eco PN/pro

• SIMATIC HMI

Siemens 802D Machine Tool MCP Agent

• Certified PROFIBUS standard slave stations (DP-V0, DP-V1, and DP-V2)

• SIMATIC ET 200S/SP/M/MP/eco/pro Distributed I/O System

• SIMATIC HMI

Siemens 840D Machine Tool IO/IO Board Agent

Modules in the SINAMICS series:

• Terminal modules (up to 8), including

• Up to 3 are TM15, TM17 high-performance models, or TM41

• Up to 8 are TM15 DI/DO or TM31

• At most one is TM54F

• SMC/SME encoder unit (connected to up to 5 encoder systems via DRIVE CLiQ)

• DMC20/DME20 DRIVE CLiQ Hub Module (up to 1)

• Motor with DRIVE CLiQ interface

• SIMOTION D410-2 is a variation of SIMOTION D, suitable for single axis applications in modular multi axis schemes. This type of control unit is part of the SIMOTION D4x5-2 controller series and is designed for book type multi axis applications. The SIMOTION D410-2 control unit is divided into PROFIBUS type (D410-2 DP) and PROFIBUS/PROFINET type (D410-2 DP/PN).

• The SIMOTION D410-2 control unit is dedicated to the modular SINAMICS S120 PM240-2 and SINAMICS S120 PM340 power modules and can be directly connected to the power modules of this series. If necessary, SIMOTION D410-2 can also be installed on the mounting board (the mounting board needs to be ordered separately).

• 

• SIMOTION D410-2 control unit and mounting board

• SIMOTION D410-2 can perform motion control functions, process functions, and PLC functions related to a single axis, and is also responsible for executing the drive control of that axis. The integrated input/output supports up to 8 high-speed cam outputs or 8 measurement inputs.

• Drive control supports servo control (achieving high dynamic response), vector control (achieving maximum torque accuracy), andV/fcontrol

• SIMOTION D410-2 can be used in synchronous groups:

• For PROFINET: having a "controller controller" or "controller device" relationship

• For PROFIBUS: it has a "master slave" relationship

Siemens 840D Machine Tool IO/IO Board Agent