Optical receiver HTOR1022C

NegotiableUpdate on 04/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Small in size and light in weight, convenient for building installation, it is an ideal product for fiber to building or unit; The ultra-low power consumption of the whole machine is less than 6.5W; The output level is adjustable, the AGC automatically maintains a constant output level, and supports adjustment within a large dynamic range of 0-20dB; Output balance controllable support adjustable within the range of 0-6dB; Parameter numerical adjustment uses LED display device information locally, and Web and SNMP network management protocols remotely. It is controlled through the chassis according to the

Product Details

Optical receiver HTOR1022C

Product characteristics

Small size and light weight
Convenient for building installation, it is an ideal product for fiber optic to buildings or units;

Ultra low power consumption
The overall power consumption is less than 6.5W;

Adjustable output level
The optical AGC automatically maintains a constant output level and supports adjustment within a large dynamic range of 0-20dB;

Output balanced and controllable
Support adjustment within the range of 0-6dB;

Parameter numerical adjustment
LED displays are used locally to display device information, while web and SNMP network management protocols are used remotely to flexibly adjust output levels and balances through chassis buttons or remote network management.

Product specifications

project		unit	Technical Parameter	notes
optical characteristics	Receiving optical power	dBm	+2~-7	When the optical power is within this range, the output level remains constant.
	Suggest using optical power	dBm	+1~-4
	Light reflection loss	dB	>45
	Light receiving wavelength	nm	1100~1600
	Optical connector/fiber type		FC/APC, Single-mode fiber
Link performance	carrier to noise ratio	dB	≥51	Under the specified link loss conditions, 59 PAL-D analog TV channel signals are configured within the frequency range of 550MHz, and digital modulation signals are transmitted within the frequency range of 550-862 MHz. The level of the digital modulation signal (within 8 MHz bandwidth) is 10dB lower than the carrier level of the analog signal. The input optical power of the optical receiver is -1dBm. When the 87-862MHz tilt is 8dB, C/CTB, C/CSO, and C/N are measured.
	C/CTB	dB	≥65
	C/CSO	dB	≥62
RF parameters	Output modes		Single/Dual Route
	Frequency range	MHz	45~1000
	In-band flatness	dB	±0.75
	Output level	dBuV	≥ 106 (single channel) ≥ 102 (dual channel)	Under the specified link loss conditions, 59 PAL-D analog TV channel signals are configured within the 550MHz frequency range, and digital modulation signals are transmitted within the 550-862 MHz frequency range. The level of the digital modulation signal (within the 8 MHz bandwidth) is 10dB lower than the carrier level of the analog signal. The input optical power of the optical receiver is -1dBm, and the equivalent output level at the 862MHz point is measured when tilted by 8dB at 87-862MHz.
	Output reflection loss	dB	45-550MHz: ≥ sixteen
	Output reflection loss	dB	550~1000MHz: ≥ fourteen
	Output Impedance	0	75
	Adjustment range of electronic attenuator	dB	0-20
	Electric slope adjustment range	dB	0-12
interface	Network management interface		10/100M standard Ethernet port, national standard Class II responder
Power specifications	supply voltage	V	AC(100 〜240 ) V/50Hz DC12V±5%
Power specifications	rated power	W	≤6.5
Environmental Specifications	Operating temperature	^oc	-25~+65
	Operating humidity		10%~85% non condensing
	storage temperature	^oc	10~95
	Storage humidity		5%~95% non condensing
Physical specifications	Physical dimensions	mm	36x140x161

Typical Networking and Applications

Color page download