Open flash point tester

DRT-1107AOpen flash point tester

One:Open flash point testerEquipment purpose: Designed and manufactured according to the GB/T261-2008 standard "Determination of Flash Point of Petroleum Products (Closed Cup Method)", to test the flash point performance of petroleum products. Simultaneously supporting GB/T261-2008, ASTMD93, and ISO2719-1973 standards

2： Temperature range: Room temperature~400 ± 0.1 ℃ German PT100 quartz temperature sensor, repeatability ≤ 1 ℃, reproducibility ≤ 2 ℃.

3： Flash point detection: Double ionization ring detection method with high sensitivity.

4： Cooling method: The heater uses heat dissipation fins and petal shaped heat dissipation holes to dissipate heat, and the bottom uses high-strength fans for cooling. After the experiment is completed, the temperature will automatically decrease.

5： Sensor arm lifting device: Imported from Japan with original hydraulic sensor arm lifting device, capable of lifting and lowering tens of thousands of times without any faults, replacing old-fashioned gear transmission and motor transmission devices (with high failure rate).

6： Ignition method: fully automatic electronic ignition or gas flame ignition. (Optional) The gas flame size can be adjusted, and the micro regulating valve is very convenient for adjusting the flame size, which is not easy to extinguish. The instrument comes with a small butane gas cylinder.

7： Heating and stirring rate: in accordance with GB/T261-2008 standard, A standard 5-6 ℃/min, B standard 1-1.5 ℃/min, optional. Mixing rate A standard 90-120r/min. B standard 250 ± 10 r/min, optional

DRT-1107AFully automatic closed flash point testerDisplay function: 7-inch color LCD touch screen, fully Chinese operation interface, 16 sets of programs that can be set and selected, and also has permission management function, effectively avoiding non professionals from setting key parameters of this measuring instrument.

9： Operating system: Windows XP operating system, software can be upgraded, Derate operating software

10： Error correction: Users can set parameters according to the actual situation, which can quickly calculate the measurement results and errors. If the measurement results exceed the tolerance, the measuring instrument will automatically re measure. Calibration must be performed using a standard oil sample to correct the error. The printed results include actual temperature values and converted values of standard air pressure.

11： Data collection: The instrument automatically saves thousands of results and comes with a 20 column dot matrix micro thermal printer, which prints quieter, faster, and clearer. The experimental results can be automatically printed.

12： Correction function: It can calibrate atmospheric pressure, vapor temperature, and sensors.

13： Interface output: USB/232 communication interface is used to communicate with the upper computer, making it easy to form a centralized management system. This machine can be connected to LIMS system, and can also be controlled by switching between computer and touch screen for instrument operation (additional charge for computer).

14： Voltage and power: AC220V ± 10%, 50Hz, power: 1000W, must have a good grounding wire, use environment of 10 ℃~30 ℃, must have a fume hood system, and cannot be affected by wind interference.

15： Volume and weight: 200 × 300 × 330 (mm) and 15kg