Online tuning fork concentration meter

NegotiableUpdate on 04/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Online tuning fork concentration meter

Product Details

The tuning fork concentration meter is used for online detection of liquid density and concentration in industrial processes, and is suitable for professions such as metallurgy, mining, papermaking, chemical engineering, and food. It is not affected by harsh conditions such as viscosity, corrosion, high temperature, high pressure, and wear of liquids, and can operate stably and reliably for a long time, with durability.

Skill indicators of tuning fork concentration meter

Output signal: 4-20mA (active output)

Power supply: 24VDC (external resistance components cannot be loaded or connected in series with PLC)

Concentration range: 0~100% (20 ℃), can be calibrated to a certain range according to usage conditions

Density range: 0-2g/ml, can be calibrated to a certain range according to usage conditions

Concentration accuracy: 0.5%, resolution: 0.1%, repeatability: 0.2%

Density accuracy: 0.003g/ml, resolution: 0.0001, repeatability: 0.0005

Medium temperature: 0-60 ℃ (liquid) Environmental temperature: -40~85 ℃

Work pressure:<1Mpa

Medium viscosity:<2000mpa · s

Explosion proof grade: Explosion proof Exdll BT4

Advantages of tuning fork concentration meter:

1. Online continuous testing eliminates the need for frequent manual sampling and laboratory testing, saving a lot of manpower and financial resources

2. Eliminate manual testing errors to ensure product consistency

3. Continuous measurement, agile response, and improvement of product quality

4. Improve the degree of automation, and the relevant concentration data can be connected to the central control room through networking

5. Not affected by bubbles, short hairs, fiber impurities, etc. in the medium

The tuning fork concentration meter is available for users to choose based on the different skill requirements of the target profession, making it more targeted and on-site testing more matching; The tuning fork concentration meter is fully sealed with stainless steel, which is more resistant to complex on-site environments. It has been certified by 3C testing and reaches IP67 protection level; Integrated high-pressure compressed air, high-pressure water and other cleaning devices, no need for expensive purchases; Mastering high-quality detection skills, the online detection accuracy can reach 0.01%, and the control accuracy can reach 0.2%; Randomly equipped with robust online software, multi-level users, displaying, recording, and tracing that meet the requirements of the pharmaceutical profession.

Shandong Dingnuo Automation Equipment Co., Ltd. specializes in products such as tuning fork densitometers, Shandong densitometers, and tuning fork online concentration meters. The tuning fork densitometer is a tuning fork densitometer sensor designed based on the principle of component oscillation. This oscillating component is similar to a two tooth tuning fork, and the fork body oscillates due to a piezoelectric crystal located at the root of the tooth. The frequency of the oscillation is detected by another piezoelectric crystal, and after phase shifting and amplification circuits, the fork body is stabilized at its natural resonant frequency. When the medium flows through the fork, the change in the mass of the medium causes a change in the resonant frequency. The tuning fork densitometer is suitable for professions including petrochemical, brewing, food, pharmaceutical, and mineral processing (such as clay, carbonate, silicate, etc.). When installing the Shandong density meter, the density sensor should be installed in an area with a small impact range. The distance between the two measuring membranes of the sensor should be 500mm. During installation, the verticality of the sensor should be ensured to avoid the two measuring membranes touching other hard objects and causing damage to the sensor. After 20 minutes of preheating with power on, the sensor output is basically stable. The company has more density meter products available. If you are interested, please feel free to contact us and we will sincerely serve you!