Online ozone detection and alarm device | Fresh air disinfection system ozone * * Quantitative analysis of generator

NegotiableUpdate on 11/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DR70C-O3-M online ozone detection alarm, with * * performance, can provide various ranges and special ranges that can meet the needs of special places, and the instrument has rich functions. The online ozone detector DR70C-O3-M is used for monitoring ozone in factory areas, clean areas, production processes, and quantitative analysis at the outlet of ozone generators. It adopts original imported high-performance ozone sensors and has a wide range of range options: it maintains stable and reliable performance under extreme conditions, continuously monitors changes in ozone concentration, and uploads data to PC for statistical analysis. This series of ozone detectors supports various types of PLC and DCS systems, and can easily complete monitoring, alarm, signal transmission, remote monitoring, and emergency equipment startup. Unique remote control and status detection allow you to easily collect data analysis and activate alarm plans even without being on site.

Product Details

Product Features:

◆ Original imported industrial grade ozone sensor, with rich range, durability, high accuracy, good linear output, and stable performance; Long service life of 2-3 years or more;
◆ Adopting new nanotechnology 32-bit microprocessing technology, high-performance circuit components, ultra-low power consumption, and stable performance; High measurement accuracy, good stability and repeatability, and superior overall performance in the same industry;
The automatic protection function against high concentration gas impact effectively protects the service life of the sensor and has good anti-interference performance;
◆ Full software automatic calibration function, sensor 3-4 level or above target point calibration, ensuring full range measurement accuracy and linearity, data recovery and other functions avoid the trouble of misoperation;
◆ Three wire 4-20mA, RS485 (Modbus RTU) dual signal output, superior compatibility with various types of PCL, DCS and other control systems; NC and NO four relay outputs;
On site with sound and light alarm function, backlit large screen multi parameter LCD display, intuitive display of gas concentration, type, unit, working status, etc;
◆ Equipped with overload protection function, fully grounded for lightning protection, anti-static magnetic field interference, automatic temperature compensation for sensors, and stable linear output at various temperatures;
Scientific and reasonable design of the air chamber structure, using aviation quality ultra-high strength aluminum materials and excellent surface treatment processes; Long term use ensures that the sensor is as bright as new, guaranteeing detection speed and stable output;
The entire series comes standard with infrared remote control function, which can be debugged without opening the cover. The remote control distance is 16 meters, and it can be debugged individually or in batches; The sensor replacement is convenient and does not require on-site calibration;
Industrial grade wireless transmission function, super strong wall penetration ability, barrier free transmission * up to 2 kilometers, one module * can simultaneously connect 255 detectors (optional function);

performance parameters
gas detection	Ozone O3
Detection Principle	Electrochemical principle sensor has a lifespan of three years
measurement range	Usage: * * 0-20PPM, 0-50PPM
	Usage: Concentration measurement, customizable range) 0-1PPM, 0-10PPM, 0-20PPM, 0-50PPM, 0-100PPM, 0-200PPM, 0-500PPM 0-1000PPM、0-2000PPM、0-5000PPM、0-10000PPM、0-30000PPM
dividedistinguishrate	0.001ppm（0-1ppm）、0.01ppm（0-100ppm）、0.1ppm（0-1000ppm）、1ppm（1000ppm Above)
essencedegree	≤ ± 3%FS	repetitiveness	≤ ± 0.5%
response time	≤ 15 seconds (T90)	recovery time	≤ 20 seconds
display mode	LCD backlit display	Detection method	Diffusion/pipeline/pump suction measurement, continuous operation
Operating Temperature	-20 ℃~+50 ℃ (customized for special requirements)	Operating Humidity	5%~95% RH non condensing (can be equipped with a filter)
Temperature Display	Not supported yet	humidity display	Not supported yet
Installation method	Wall mounted, pipe mounted, flow-through, pump suction	Shell material	All aluminum shell, fluorocarbon paint corrosion-resistant, sturdy and durable
Explosion-proof label	Exd II CT6	Protection level	IP65
Functional ParametersCall for more detailed consultation
CPU	Adopting new nanotechnology 32-bit microprocessing technology	concentration unit	ppm
Memory capacity	Depending on PC hard drive	Contact capacity	220VAC 1A/5VDC 1A /24VDC 1A
Data storage	Connect computer storage	Remote control function	Infrared remote control, capable of remote operation up to 16 meters away
alarm method	High/low alarm/interval alarm/weighted average alarm	safety protection	Overload protection, lightning protection, anti-static magnetic interference
signal output	Three wire system 4-20mA, RS485 (Modbus RTU)
Other parameters
Standard Accessories	Instruction manual, certificate of conformity, warranty card, packaging box, installation of burst screws remote control	Optional accessories	24VDC power supply. 316L stainless steel chamber Flow type chamber connector Welding variable diameter joints Drying machine Brushless DC pump wireless module
Power supply	24VDC（12-30VDC）	work pressure	≤ 30KPa (gauge pressure) High pressure optional pressure reducer
rulerinch	180x140x80mm（LxWxH）	heavyquantity	2Kg
after-sales service
Customer service hotline
warranty period	Sensor warranty for one year, other components warranty for three years
Detailed content	Our company has established a strong after-sales maintenance service team, consisting of experienced on-site engineers and top-notch technicians, providing one-on-one service and implementing a responsibility to person system to ensure that any problems you encounter can be resolved in the shortest possible time. Within 7 days of delivery, there is a guaranteed return or exchange for quality issues; Any product quality complaints within 60 days of delivery will be resolved within 24 hours. Complaints about product quality that have been delivered for more than 60 days will be responded to within 1 hour, with reasons and solutions provided within 24 hours, and resolved within 3 working days; If it is expected that the project cannot be completed within 3 working days, our company will first send a new machine to the customer for temporary use until the problem is resolved. Any costs related to product quality during the shelf life will be fully borne by our company. During the warranty period, we will provide free repairs due to improper use by your side or natural environment. The materials and accessories used for repairs will only be charged at cost price. For products beyond the warranty period, our company promises lifelong free maintenance and calibration. The materials and accessories used for repair are only charged at cost price.