One in two out distribution device

，One in two out distribution device

It provides isolated power supply to the on-site two-wire transmitter. Simultaneously convert the (4-20) mA Dc signal sent by the two-wire transmitter into an isolated (4-20) mA DC or (1-5) V DC signal output. Supply indicators, recorders, analog regulators, programmable single/multi loop digital regulators, industrial process control machines, and distributed systems to form a variety of monitoring and control systems, widely used in industrial production process detection and control systems. This distributor is an essential instrument variety for non explosion proof automatic control systems.

Product appearance:One in two out distribution device

Product Features:

Distribution voltage: (18.5-28.5) V

Input signal: (4-20) mA DC

Output signal: (4-20) mA DC or (1-5) V DC

Load resistance: ≤ 500 Ω at 4-20 mA DC output; When ordering special loads, indicate that they are available for (250-600) Ω, etc. ·(1-5) V Dc output ≥ 250k Ω

Accuracy: Level 0.5

Common mode interference:<5mV at 50Hz

Response time:<1s

Isolation: mutual isolation between input, output, and power supply

Power supply: 24V Dc ± 2V

Power consumption:<1.5W

Environmental temperature: (-10~60) ℃

Relative temperature:<90% (non condensing)

Insulation resistance: ≥ 100M Ω between power supply, input, and output terminals

Insulation strength: No arcing or breakdown between the power supply, input, and output terminals at 500V AC1 for 1 minute

Weight: Approximately 150g

Maintenance: The instrument can be replaced while the wiring is installed

Functional diagram:

Instrument wiring diagram:

Instrument selection:

Ordering Guide:

The user needs to distribute power to the on-site pressure/differential pressure transmitter, with 1 channel (4-20) mA output. Order model: WP-6231