Oil seal rotation test bench

CZ-3042typeOil seal rotation test benchThe machine is suitable for conducting sealing performance tests on various rotary oil seals and determining the quality of the oil seal based on the results. The oil seal is installed on the testing machine, and the spindle rotates at a certain speed. After a certain period of operation, observe whether the oil seal leaks. Two oil seals can be tested each time, and forward and reverse rotation can be performed during oil seal testing. According to the characteristics of the experiment, the experiment time can be set, and interval experiments can be conducted to obtain the total experiment time from a total timer. This machine has a novel structural design, good starting performance, large starting torque, wide speed measurement range, small torque change rate, low noise, and easy operation. conform toGB/T14273Performance test method for rotary shaft lip seals（Rotary shaft lip type seals-Performance test proceduces）Standard.

Technical parameters of oil seal rotation test bench

1 Spindle speed:0-8000r/min(Stepless speed regulation)

2 Spindle runout:<0.03mm

3 Axis offset adjustment amount:0-1mm

4 Temperature regulation range:0-200℃

5 Maximum pressure used: ≤0.06MPa

6 Simultaneously test the number of oil seals:2a

7 Testeable range of oil seal shaft holes:Φ7-150mm

8 Motor power:2.2Kw×2

9 power supplyAC380VThree phase four wire system (must have a neutral wire) ±10% 50Hz

10 Overall dimensions:1100×770×1400mm

11 Quality:300KG