OW-XSR203F Flow Accumulator Display Instrument

NegotiableUpdate on 07/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Details

The XSR203F intelligent flow integrator adopts a high-performance ARM Cortex-M3 32-bit RISC core as its core, supplemented by a new intelligent flow integrator instrument with large-scale integrated circuits and graphic LCD displays. The instrument displays a large amount of information, is easy to operate, and has a friendly interface. Mainly used for flow accumulation of various fluids, fluid density temperature and pressure compensation, data remote transmission and other functions; The intelligent flow integrator produced by our company not only has the above functions

Adopting high-performance ARM Cortex-M3 32-bit RISC core, it can simultaneously achieve 3-channel signal acquisition, display, and 1-channel traffic transmission output (transmission output needs to be customized by the user);
Given inputs for flow, temperature compensation, and pressure compensation, multiple signals can be input simultaneously without the need to replace modules, and can be configured through software;
The numerical range for displaying engineering quantity data is wider, and it can display 4-digit values: -999~9999;
◆ In addition to supporting standard serial communication interfaces: RS232C, RS485, fieldbus CAN; Supports Modbus RTU protocol, note: customization is required to enable CAN communication
◆ Two relay alarm outputs, simultaneously indicating the lower and lower limits, lower and upper limits, and upper and upper limits of each alarm;
◆ Support external micro printers to manually print data and curves, meeting users' on-site printing needs;
Equipped with standard USB interface, supporting USB 1.1 and 2.0 USB flash drives, historical data transfer is fast and convenient;
Standard serial communication interface: RS232C. Note: Customization is required to enable CAN communication;
◆ Adopting efficient green switching power supply, dual-use of AC and DC, with input voltage of 85-264VAC or 120-370VDC, input frequency range of 47-63Hz;
The instrument integrates hardware real-time clock, which can run accurately even in the event of power failure, making it more convenient for enterprise measurement management;
Multiple additional functions are available: historical curve, transmission output, printing, 24VDC power distribution, etc. Note: Customization is required to enable additional functions.
● Screen: 128 * 64 dot matrix blue screen LCD display;
Accuracy: Real time display: ± 0.2% F.S;
● Remembrance accuracy: ± 0.2% F.S;
(Note: Thermocouples should remove cold junction errors;)
Input specifications: 3-channel analog signal input, supporting multiple signal types, fully isolated between channels, with isolation voltage greater than 1000V;
Flow channel: 4-20mA and PI signal;
Temperature channel: B、E、J、K、R、S、T、0-20MV、0-100mV、0-5V、1-5V、0-20mA、4-20mA、Pt100、Cu50 Waiting for signals;
Pressure channel: 0-20mA, 4-20mA, 0-5V, 1-5V and other signals;
Isolation impedance: 20M Ω @ 1000V;
Distribution output: transmitter centralized distribution+24VDC, supports multi-channel isolated distribution, distribution ≤ 30mA/channel;
● Transmission output: Supports one flow channel transmission output (4-20mA), with a load capacity of 750 Ω (maximum);
● Relay alarm output: 2-channel relay contact output, contact capacity 3A@220VAC / 1A@30VDC , configurable upper limit, upper limit, lower limit, and lower limit alarms; Communication and printing: Communication interface - RS232C, RS485 or CAN, baud rate - (1200, 2400, 9600, 19200, 38400, 57600), printing interface - RS232C directly connected to a micro printer;