OSMS/SGSP Sigma Optical Machine Automatic Rotary Sliding Table

OSMS/SGSP Sigma Optical Machine Automatic Rotary Sliding TableIt is a stepper motor type rotating platform that uses rolling bearings as guide rails and worm gears as driving mechanisms. It is very suitable for positioning measurement, inspection, and evaluation devices.

OSMS/SGSP Sigma Optical Machine Automatic Rotary Sliding Table

Characteristics of OSMS/SGSP Sigma Optical Machine Automatic Rotating Sliding Table：

1. The limit position sensor in the CW direction of the automatic rotation platform also serves as the origin sensor, which is used as a reference for resetting the origin.

2. The stop position when driving with half step subdivision and performing origin reset operation using MINI mode is the 0 degree mark position.

pay attention to

Attention should be paid when installing and using it upside down or vertically. Different installation directions may result in different indicators such as accuracy or load-bearing capacity.

The OSMS/SGSP Sigma photoelectric control rotary slide table currently has standard products available for sale, including OSMS/SGSP-40YAW, according to different size specifications OSMS/SGSP-60YAW、OSMS/SGSP-80YAW、OSMS/SGSP-120YAW、OSMS/SGSP-160YAW Due to model adjustments and changes, all five models of the original SGSP series electric control rotary slide table will be replaced by OSMS.

General indicators for OSMS/SGSP Sigma opto mechanical control rotary slide table

■ Technical specifications for motors/sensors

Motor type

OSMS : 5-phase stepper motor 0.75A/phase (Tamagawa Seiki Co., Ltd.)

SGSP : 5-phase stepper motor 0.66A/phase (Tamagawa Seiki Co., Ltd.)

Motor model

OSMS : TS3664N4E10(□24mm)

SGSP : TS3664N4(□24mm)

Motor step angle: 0.72°

Sensor power supply voltage: DC5～24V±10%

Sensor current consumption: Below 15mA

Electrical characteristics of sensor output terminal: NPN collector open circuit output below DC30V and below 50mA

The meaning of sensor signal: When blocked from light, the output transistor is turned off

Recommended driver/controller models for selection

Driver SG-5M SG-5MA、MC-S0514ZU、SG-514MSC、MC-7514PCL

Controller GSC-01 GSC-02、SHOT-702、GIP-101、SHOT-302GS、SHOT-304GS、HIT-M·HIT-S、PGC-04-U、HSC-103