O-ring tensile testing machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The XJ830C-O sealing ring tensile testing machine is suitable for comprehensive capability testing of materials such as metal sealing rings, nitrile rubber sealing rings, CR chloroprene rubber sealing rings, natural rubber sealing rings, fluororubber sealing rings, silicone sealing rings, EPDM rubber sealing rings, polyurethane rubber sealing rings, chloroether rubber sealing rings, acrylic rubber sealing rings, butyl rubber sealing rings, styrene butadiene rubber sealing rings, etc.

Product Details

XJ830C-O-ring tensile testing machineapplication field

A comprehensive capability testing equipment suitable for metal sealing rings, nitrile rubber sealing rings, CR chloroprene rubber sealing rings, natural rubber sealing rings, fluororubber sealing rings, silicone sealing rings, EPDM rubber sealing rings, polyurethane rubber sealing rings, chloroether rubber sealing rings, acrylic rubber sealing rings, butadiene rubber sealing rings, styrene butadiene rubber sealing rings and other materials.

XJ830C-O-ring tensile testing machineTest instrument requirements:

(1) This experiment is conducted on a tensile machine, which should comply with the relevant provisions of GB/T528 "Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber". The tensile machine needs to have a guiding rack device and a device for measuring the elongation of the specimen;

(2) The test fixture is composed of two shafts with ball bearings and a diameter of at least 12mm on the upper and lower sides. When the two wheels are close to each other, the new distance is within 25mm. The lower fixture is equipped with a gear transmission device, which should be meshed with the guide rack on the tensile machine during the test;

(3) The linear test fixture adopts a universal tensile test fixture, but it is necessary to ensure that the test sample is continuously held at the clamping position during the test process.

XJ830C-O-ring tensile testing machineTechnical specificationsMain specifications

1Maximum capacity for high load: up to 5000N (optional)

2、荷重元精度 Load Accuracy： 0.01%

3Measurement accuracy:<± 0.5%

4Operation mode Control: Fully computer-controlled

XJ830C-O-ring tensile testing machine5Effective width: 150mm

6Effective stretching space Stroke: 700mm (can be increased as needed)

7Test speed Tetxing speed: 1~500mm/min can be adjusted freely

8Speed accuracy: within ± 0.5%;

9Displacement measurement accuracy stroke accuracy: within ± 0.5%;

10Deformation measurement accuracy Displacement accuracy: within ± 0.5%

11Safety device: electronic limit protection, emergency stop button Safety stroke

12Main Unit Weight: Approximately 85kg

XJ830C-O-ring tensile testing machinePartial update features:

1. Auto reset: When the device receives a command, the measurement system automatically resets to zero;

2. Automatic parking: automatic recognition test force, automatic parking after fracture;

3. Memory storage: Experimental data and conditions can be automatically saved once, twice, or multiple times to avoid loss;

4. Testing process: The testing process, measurement, display, analysis, etc. are all completed by CNC Microsoft;

5. Display mode: Data can display strong force;

6. Result reproduction: The experimental results can be accessed freely;

7. Limit protection: It has two levels of protection: programmable control and mechanical protection;

8. Overload protection: automatic shutdown when the load exceeds the rated value;

9. Emergency stop: equipped with an emergency stop switch, used to cut off the power supply of the entire machine in emergency situations;

10. Upgradeable to enable independent operation of the host and microcomputer;