- Phone
-
Address
Building A, 7523 Beiqing Road, Qingpu District, Shanghai
Product Categories
Shanghai Xiangjie Instrument Technology Co., Ltd
Circuit board three-point bending tester
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The XJ828C circuit board three-point bending tester is a professional instrument suitable for conducting three-point and four point bending tests on materials such as circuit boards, mobile phones, tablets, LCDs, touch screens, photovoltaic glass, and plastics. Can calculate parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc; It can perform curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS 2003 database support, making the system more functional.
Product Details
XJ828CCircuit board three-point bending testerA professional instrument suitable for conducting three-point and four point bending tests on materials such as circuit boards, mobile phones, tablets, LCDs, touch screens, photovoltaic glass, and plastics. Can calculate parameters such as maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus, etc; It can perform curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS 2003 database support, making the system more functional.
XJ828CCircuit board three-point bending testerMain specifications of technical parameters
1. High load accuracy: 5KN, 10KN, 20KN (optional)
2、 荷重元精度 Load Accuracy：0.01%
3. Measurement accuracy:<± 0.5%
4. Operation mode Control: Full computer control, Windows mode operation
5. Effective test width: approximately 410mm
6. Effective stretching space Stroke: about 800mm
7. Test speed Tetxing speed: 0.1~500mm/min
8. Speed accuracy: within ± 0.5%;
9. Displacement measurement accuracy stroke accuracy: within ± 0.5%;
10. Deformation measurement accuracy Displacement accuracy: within ± 0.5%
11. Safety device: electronic limit protection, emergency stop button Safety stroke
12. Main Unit Weight: Approximately 240kg
Product image of XJ828C three-point bending testing machine for sheet metal:
XJ828CCircuit board three-point bending testerBasic configuration:
1. One testing machine host
2. Two high-precision ball screws from Germany's Uliniev
3. 1 set of Panasonic AC servo motor and servo system from Japan
4. One high-precision sensor from the United States
5. A set of high-precision synchronous system of Xiangjie Survey Center in Taiwan, China, China
6. 1 set of material testing machine measurement and control system
7. 1 HP computer (optional)
8. 1 HP printer (optional)
9. 1 set of professional testing software for material testing machine (optional)
10. 1 electronic extensometer (optional)
11. 1 set of large deformation measurement system (optional)
12. 1 set of stretching fixtures (optional)
In addition to the stretching fixtures listed above, there are also fixtures used for stretching, compression, bending, shearing, peeling, tearing and other tests of various materials such as sheets, strips, wires, foils, strips, fibers, boards, rods, blocks, ropes, fabrics, and nets. They are interchangeable and users can choose according to their own needs.
Similar Product Recommend
