Normally closed gas solenoid valve - VMR (quick opening and quick closing)

Caliber ranges from DN8 to DN150;

Suitable for air and non corrosive gases, special seals can be used for biomethane and coke oven gas;

All calibers are available in explosion-proof type and can be used in Class 2 and Class 22 areas (94/9EC).

The energized valve opens, and once the power is cut off, the valve immediately closes.

Both periodic and continuous operations are acceptable.

Equipped with flow regulation function (excluding those with brass valve body)

The valve inlet is equipped with a precision filter screen to protect the valve components and downstream equipment, preventing impurities from entering the downstream.

The inlet ends on both sides of the valve are equipped with G1/4-inch pressure gauges, which can be connected to pressure gauges, pressure switches, leak protectors, or other gas equipment (except for brass valve bodies). All entrances and exits with flange connections are equipped.

There are two options for the coil: junction box or plug.

All components are resistant to any mechanical, chemical, and thermal effects during use.

Effective impregnation and surface treatment have improved mechanical hardness, enhanced the sealing and anti-corrosion performance of components.