Ningbo Ruide LD30-H350S power frequency electromagnetic induction bearing heater

Ningbo Ruide LD30-H350S Bearing HeaterNingbo Ruide LD30-H350S power frequency electromagnetic induction bearing heater

Product Technical Parameters:

1) Equipment model: Red LD30-H350S bearing heater, electromagnetic induction heating

2) Equipment structure: small car type

3) Equipment power supply parameters: Voltage: 380VFrequency 50HZ-60HZ

4) Suitable for workpieces: inner diameter: 80-500mm; maximum outer diameter: 950mm, maximum width: 380mm

5) Rated power: 25KVA6) Temperature control: 0~300 ℃, time control: 0~99 minutes and 59 seconds7) Host coil: Three sets of copper coils are used

Ningbo Ruide LD30-H350S power frequency electromagnetic induction bearing heaterTechnical parameters:

1) The heating equipment adopts power frequency electromagnetic induction heating, with temperature and time display control modes;

2) The heating method is through sleeve heating or horizontal heating.

3) Three sets of heating coils are 2-3 times more efficient than a regular set of coils.

4) The heating temperature can be controlled between 0-300 ° C.

5) The temperature measuring element adopts a contact wire magnetic probe.

6) Automatic demagnetization after heating

8) Circuit system: The device circuit system is designed reasonably and has self-protection and fault alarm functions;Power supply: three-phase five wire AC 380V ± 10%220V±10％ 50HZ±2%；a. The operating height and structure meet the requirements of ergonomics. The sensor is easy and fast to operate.

b. The floor plan layout occupies the smallest area, the workstation settings, the control screen settings, and the size structure are reasonable.

1.2. Error prevention device:The device has a protective function in case of misoperation.The B device has an error prevention device to prevent the device from burning out due to damage to the temperature sensor or failure to connect the temperature sensorOr the workpiece and personal safety accidents may occur.

1.3. Equipment structureThe heating equipment is of the trolley type. The host is controlled in a power control cabinet.The electrical components of equipment B are commonly used in the market for easy maintenance, cleaning, and replacement.

1.4. Equipment standards and functional modularization:The design of device A complies with Chinese national standards or ISO standards.The modularization of control components facilitates equipment installation and process adjustment.

1.5. Sensor manufacturing standards:Ningbo Ruide Testing Instrument Co., LtdThe induction heater is composed of a dry self cooling power frequency induction heating device and a control part, and the control box is in accordance with IEC439-76 standard manufacturing, the host is B-grade insulation, the skeleton is made of glass fiber epoxy board, and the wires are made of double glassGlass wire copper flat wire, the winding is dried and coated with epoxy resin, and the withstand voltage is tested according to IEC standards for stabilityThe assessment requires powering on for 5 minutes at 2000V, at which point the insulation resistance should still be greater than 2M Ω. Considering the heated workpieceThe temperature rise of the insulation far exceeds the allowable temperature rise of Class B insulation. In addition to using anti thermal radiation technology, measures were also taken in the designOther insulation measures have been taken.The shell of the B host is made of 304 stainless steel plate, which is less affected by magnetic fields.The main wire package of the fully enclosed insulated coil and the casing are poured with a special formula of high-temperature resistant epoxy bonding48 hour curing, good thermal conductivity, easy wire package heat dissipation, and long-term use without cracking.

1.6. Equipment appearanceThe appearance of the device is harmonious, neat, and beautiful.The basic paint color of equipment B can be made according to the color palette (or national standard number) provided by Party A.

1.7. Safety and Environmental Protection:General standard: Labor protection clauses for human safety, protection, radiation, etc. comply with China's national and industry standardsRelated standards.The design of device B complies with Chinese national standards or ISO standards. If there are no national standards, it meets the enterprise standards.The noise level of the C device during stable operation is less than 70dB (tested according to ISO standards).The equipment is equipped with a safety operation manual, and dangerous areas are marked with text and danger graphics.

2) Main technical specifications and configuration of the equipment:

2.1. General specifications for heating equipmentThe heating equipment ensures uniform heating of the workpiece and the workpiece temperature meets the assembly requirements.Heating noise: less than 70 decibels;The heating temperature can be adjusted from 0 to 300 ℃;The heating time can be set, adjustable from 0 to 99 minutes and 59 seconds;Automatic demagnetization of fThis heating device is a floor standing split type device that is movable and can heat the workpiece on site. The placement height meets the requirementsHuman engineering, easy to operate;The design of the H sensor is reasonable, and the workpiece's own heating can maximize the solution of uniform heating temperature of the workpieceSexual issues;The overall consistency design of the device facilitates storage, remote use, and transportation.It can display temperature and complete the process according to the set heating process temperature, while achieving real-time temperature digitizationDisplay;The heating equipment has abnormal protection functions, such as short circuit, overheating, etc. Immediate shutdown and alarm in case of abnormal situation;After heating the workpiece, the heater has an automatic demagnetization function.

3) Equipment Heating Process DescriptionConnect the device power supply;Set the target heating temperature for the workpiece. (Heating in time mode requires setting the heating time);Start the heater host at the heating position of the C sleeve;Temperature control, while displaying the temperature of the workpiece;After heating to the set temperature, the heating equipment stops heating.

4) Equipment packaging, transportation, installation and commissioning:After the equipment is produced, the packaging, transportation, installation, and commissioning are the responsibility of the supplier.

5) Technical services and quality assurance1) The equipment design and manufacturing meet the requirements of the demand side, with a one-year warranty, and can be increased at any time according to the production development of the demand sideNew varieties to meet the demand for technological updates. Technical support accompanies the demand side from beginning to end.

2) During the warranty period, timely repair services and necessary spare parts will be provided free of charge within the warranty scope.

3) After the warranty period, we can provide free online service and technical guidance. And promise to offer discounted prices toYour company provides timely supply of parts and only charges the cost of replacing the parts.

6）Equipment delivery time: spot supplyNingbo Ruide LD30-H350S power frequency electromagnetic induction bearing heater