New standard fully automatic road seepage meter

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The new standard fully automatic pavement permeability meter is used to measure the permeability coefficient of asphalt mixture specimens, in order to verify the mix design of asphalt mixtures. Can be used to measure specimens (or road surfaces) with a permeability coefficient greater than 300mL/min. It has functions such as automatic water level measurement, automatic timing, automatic calculation of results, and built-in battery. Comply with the standard requirements of T0730-2025 Asphalt Mixture Water Penetration Test in JTG 3410-2025 "Test Regulations for Asphalt and Asphalt Mixtures in Highway Engineering".

Product Details

Product Introduction:

New standard fully automatic road seepage meterUsed to determine the water permeability coefficient of asphalt mixture specimens to verify the mix design of asphalt mixture. Can be used to measure specimens (or road surfaces) with a permeability coefficient greater than 300mL/min. It has functions such as automatic water level measurement, automatic timing, automatic calculation of results, and built-in battery. Comply with JTG 3410-2025 "Test Code for Asphalt and Asphalt Mixtures in Highway Engineering" T0730-2025 Asphalt Mixture Water Penetration TestThe standard requirements.

Product Parameters:

1. Measuring cylinder capacity 600ml

2. The inner diameter of the lower opening is 150-151mm, the outer diameter is 300mm, and there is a water outlet hole in the middle of the upper part with a diameter of 25mm

3. Collar: a variable thickness metal ring with a cutting edge at the bottom, an outer diameter of 149~150mm, a width of 5mm, and an upper wall thickness of approximately 2.25mm

4. Plastic ring: inner diameter 150mm, outer diameter 300mm

5. Weight: 2 pieces with a total weight of approximately 10kg