NH-HN40 Gangue Sliming Test Flipper

Product features of NH-HN40 gangue mud turning tester

The NH-HN40 gangue mudification test turner is used to sieve gangue and prepare samples with particle sizes of 5.6-2.8 mm. After drying, the samples are placed in a turning bottle and mixed with water. Sift the formed suspension using a test sieve with a pore size of 500 µ m, and dry and weigh the residue on the sieve. Determine the fine mud content (%) below 10 µ m using sedimentation method. The instrument shall comply with the requirements of MT-T109-1996 "Coal and Gangue Sliming Test Method". Suitable for laboratory use in coal, metallurgy, coking departments and research institutions

Overview of NH-HN40 Gangue Mudification Flip Tester

The NH-HN40 gangue mud test flip meter uses the settling method to determine the fine mud content (%) below 10 µ m in gangue. The instrument shall comply with the requirements of MT-T109-1996 "Coal and Gangue Sliming Test Method". Suitable for laboratory use in coal, metallurgy, coking departments and research institutions.

Environmental conditions for the use of NH-HN40 gangue mudification overturning tester

(1) Environmental temperature: 5 ℃~35 ℃

(2) Relative humidity: ≤ 85%

(3) The usage environment should not have strong corrosive gases, strong electromagnetic equipment, or strong magnetic fields.

Main technical parameters of NH-HN40 gangue mudification overturning tester

Spindle speed: 40r/min

Display mode: LED digital display, manual reset or automatic reset upon startup

Power supply voltage: 220V ± 10% 50Hz ± 1Hz

Motor power: 10W

Dimensions (length x width x height): 400mm x 860mm x 400mm

Weight: Approximately 20kg