- Phone
-
Address
Yongfeng Town Minsheng Industrial Park, Tianchang City, Anhui Province
Anhui Kanglan Electric Co., Ltd
Yongfeng Town Minsheng Industrial Park, Tianchang City, Anhui Province
NH-FG23 0.6/1kV 2 * 16 High Temperature and Fireproof CablePurpose: High temperature resistant and fire-resistant cable is suitable for signal detection in high temperature environments with AC rated voltage of 300/500V and below. Especially suitable for control and power transmission lines of fire and security system protection circuits
| Usage characteristics: | |
| Working temperature: 200 ℃ for long-term use Short term use at 1000 ℃ for 90 minutes | |
| Rated voltage Uo/U: 300/500V | |
| Environmental temperature: Fixed installation -60 ℃ Non fixed installation -20 ℃ | |
| Minimum bending radius: Non armored cables shall not be less than 10 times the outer diameter of the cable Armored cables shall not be less than 12 times the outer diameter of the cable |

NH-FG23 0.6/1kV 2 * 16 High Temperature and Fireproof CableIt is a fire-resistant, armored, high-temperature resistant and fire-resistant cable, suitable for industrial scenarios with high requirements for fire prevention and environmental adaptability, such as metallurgy, electricity, petrochemicals, high-rise buildings, etc. The cable has the characteristics of high temperature resistance, corrosion resistance, flame retardant, waterproof and aging resistance, and can operate stably under high temperature or severe weather conditions.
NH-FG23 0.6/1kV 2 * 16 High Temperature and Fireproof CableThe parameters are as follows:
Rated voltage: 0.6/1kV, suitable for AC power transmission lines;
Conductor structure: 2-core, with a cross-sectional area of 16mm ² per core, made of bare copper wire with excellent conductivity;
Sheath material: silicone rubber, with excellent heat radiation resistance, cold resistance, acid and alkali resistance, and ozone resistance;
Armor type: with suffix "23", indicating steel belt armor, enhancing mechanical protection, suitable for direct burial or laying environments that are easily damaged by external forces;
Working temperature range: The long-term allowable working temperature can reach 180 ℃, and the laying temperature should not be lower than -25 ℃;
Bending radius: not less than 10 times the outer diameter of the cable. During installation, attention should be paid to the bending radius to avoid damage.
This cable is widely used for fixed power transmission lines, especially suitable for environments with high temperature, high humidity, and corrosive gases. Due to its fire resistance (marked with "NH"), it can still maintain a certain amount of power supply in case of fire, ensuring the operation of emergency systems
| Performance project | unit | technical indicators | |||||
| Direct current obstruction of conductors | Ω/km | Cross section mm2 | 0.5 | 0.75 | 1.0 | 1.5 | 2.5 |
| resistor | 36.0 | 24.5 | 18.1 | 12.1 | 7.41 | ||
| Test voltage | kv/1min | 1.5 | |||||
| insulation resistance | MΩ.km | 100 | |||||
| Fire resistance characteristics | Class A (flame temperature 1000 ℃ test for 90 minutes, 3A fuse continuously) | ||||||