Multi functional electricity meter for sub item metering in North American buildings

1、 Product Overview:

ADL3000-E-B/KCMulti functional electricity meter for sub item metering in North American buildingsIt is an intelligent instrument designed mainly for the electricity statistics and management needs of power systems, industrial and mining enterprises, and public facilities. The product has the advantages of high accuracy, small size, and easy installation. Integrate common power parameter measurement and energy metering and assessment management, providing various energy data statistics for the past 12 months. It has 2-31st harmonic and total harmonic content detection, with switch input and switch output to achieve "remote signaling" and "remote control" functions, and has alarm output. Equipped with RS485 communication interface, MODBUS-RTU protocol can be selected. This power meter can be widely used in various control systems, SCADA systems, and energy management systems. The product meets the requirements of enterprise standards IEC62053-21 and IEC62053-22.

Can meet the networking requirements of various occasions. It can be applied to various power monitoring systems, energy consumption management, and electricity billing systems, especially suitable for total electricity metering and total electricity management in commercial squares, office buildings, parks, factories, schools, apartment buildings, charging piles, enterprises and institutions, and other places.

1. Active power accuracy: 0.5S, reactive power accuracy: 2; Voltage and current accuracy: 0.2;

2. Voltage specifications: 3 × 66/115V, 3 × 220/380V;

3. Current specifications: 3 × 1 (6) A (connected via transformer), 3 × 10 (80) A (directly connected);

4. Working temperature: -25 ℃~+55 ℃

5. Relative humidity: ≤ 95% (no condensation)

2、 Standard configuration:

1. Support full power parameter measurement (U, I, P, Q, S, PF, F); And 2-31st harmonic measurement;

2. Support active energy metering (forward and reverse), reactive energy metering (forward and reverse), and phase wise active energy metering for A, B, and C；

3. Support infrared communication;

4. LCD Chinese display, backlight delay off time can be set; In addition to displaying electrical parameters and energy values, LCD can also display information such as current quadrant, communication status, phase loss, voltage loss, reverse sequence, etc;

5. Key programmable communication, transformation ratio and other parameters；

6. Support one active pulse output；

3、 Optional configuration:

1. Support 4 types of demand and occurrence time statistics;

2. Support historical electricity consumption for the past 48 months and 90 days (including electricity consumption at various rates, supporting 14 time zones, 8 time periods, 14 daily time periods, and 8 rates);

3. Support one switch output and one active switch input; (Second 485 communication is not supported when selecting this function)

4. Supports three-way external NTC temperature measurement function, with a temperature range of -40 ℃~99 ℃. (When selecting this function, it does not support switch quantity and second 485 communication);

5. The Modbus RTU protocol/DL/T645-07 protocol is adaptive,Supports 2-channel independent 485 communication, with adaptive Modbus RTU protocol/DL/T645-07 protocol. The two 485 channels can be independently set and different protocols can also be used; The baud rate can be set from 1200bps to 19200bps, and the parity bit can be set;

4、 Typical wiring:

Three phase three wire, three phase four wire

Note: The wiring torque directly connected should not exceed 4.0N · m, and the wiring torque connected through a transformer should not exceed 2.0N · m.

5、 External dimensions

Dimensions: 126 * 88 * 69,35mmStandard DIN35 rail installation;

ADL3000-E-B/KCMulti functional electricity meter for sub item metering in North American buildingsCertificate: UL certified; CE certification.

About the Company

Ankerui Electric Co., Ltd. was established in 2003 and listed on the ChiNext board in 2012 with the code 300286. The company is headquartered in Jiading, Shanghai and is a high-tech enterprise and software company that provides solutions for energy efficiency management and energy safety of enterprise microgrids. It has obtained various certificationscertificateAnd over 600 software copyrights (as of December 31, 2022).

Ankeri has more than 500 R&D engineering and technical talents, focusing on user side energy efficiency systems and energy Internet, has one-stop service capabilities from cloud platform software to terminal components, and has formed a "cloud edge end" energy Internet ecosystem. At present, there are more than 14000 sets of system solutions operating throughout the country. The company has locally configured sales and technical support teams in major cities across the country to quickly respond to customer needs. The e-commerce team faces the country and steadily expands overseas markets. Online and offline combination provides users with a good service experience. The company's existing cloud platforms and system solutions cover power, environmental protection, fire protection, new energy, data centers, intelligent buildings, transportation, municipal engineering and other fields.

The company will adhere to the concept of "innovation, efficiency, unity, and integrity", insist on stable operation and continuous innovation, provide solutions for users' safe, reliable, and efficient energy use, and provide data support for achieving "carbon peak and carbon neutrality".

production base

Jiangsu Ankerui Electric Appliance Manufacturing Co., Ltd., a production base located in Jiangyin City, Wuxi, is a high-tech enterprise in Jiangsu Province. It has a product testing center that has obtained national laboratory certification and accreditation. With the help of an information management system, it provides guarantees for the industrialization and large-scale implementation of the company's products. The newly established Ankerui Microgrid Research Institute is committed to the research and development of enterprise microgrid technology, further providing solutions for users to build safe, reliable, and green microgrid energy management systems.