Motor specific thin film type thermistor

NegotiableUpdate on 11/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

■ Temperature measurement range -50~180 ℃ ■ Can provide single or double thermal resistors ■ 100 fixed values and errors comply with DIN standards ■ Adopting imported Pt100 thin film structure platinum resistance elements ■ Can be disassembled without tools ■ Suitable for temperature measurement of motor coils and stator cores

Product Details

Product Application

■ Temperature measurement of coil winding

■ Temperature measurement of stator core

Electric motor

■ Engine

Industries such as pharmaceuticals, food, electricity, metallurgy, glass, chemicals, rubber, and textiles

Technical data

insulation resistance	When the ambient temperature is within the range of (15-35) ℃
	When the relative humidity is less than 80%
	The insulation resistance value of platinum resistance should be greater than 100M Ω
Self heating effect	Thermal resistance allows a maximum measured current of 2-5mA
	The resulting temperature rise shall not exceed 0.3 ℃
insulation class	H-grade
Protection level	IP65
probe length	60mm,80mm,100mm,200mm,250mm,500mm
Probe width	8mm，10mm，12mm
Probe thickness	3mm
Voltage endurance range	2.5KV，4KV
response time	t0.5，10s～120s
accuracy class	Pt100, Class A: ± (0.15+0.002 \| t \|)
	Grade B: ± (0.30+0.005 \| t \|)
	\| t \| "is the absolute value of the measured temperature of the temperature sensing element
Connecting wires	Silicone, ambient temperature -50~180 ℃, polytetrafluoroethylene
	Silicone, ambient temperature -50~180 ℃, polytetrafluoroethylene
Electrical connection	The end of the wire is exposed and can be equipped with a cold press connector or a multi pin connector
wiring method	Two wire system, three wire system

Instructions

·The standard for cable connection ends is to directly expose the outgoing line. If you need a cold pressed joint or socket, please consult our sales personnel and indicate it when selecting;

·The standard cable material is silicone cable. For other materials, please consult our sales staff and specify when selecting;

·For special ranges or the selection of other temperature sensing components, please consult our sales personnel and specify when selecting;

·The standard isolation voltage of PL7110 is 2.5KV. If you need to choose a 4KV withstand voltage strength, please consult our sales personnel and indicate it when selecting.