Mobile static grounding alarm | SA-YP fixed type

SayforMobile static grounding alarm | SA-YP fixed typeStatic grounding alarm

The electrostatic grounding alarm consists of an explosion-proof electrostatic grounding monitoring device, a spiral cable, and a grounding clamp. The electrostatic grounding alarm is the core equipment that makes up the system, and there are two options to choose from: automatic contraction rubber cable or spiral cable. Static grounding * uses high-quality chips and micro electronic circuits to continuously detect the resistance values of the connected device circuit and grounding terminal circuit. Static grounding * is effectively connected through *, grounding clamp body, grounding clamp cable, grounding cable, and grounding pile. Static grounding * creates equipotential between the connected device and the ground, and introduces static electricity into the ground. Static grounding * can make the static grounding circuit resistance of the equipment comply with national safety standards.

Main technical parameters of SA-YF mobile electrostatic grounding alarm:

Working voltage: AC220V ± 10% 50Hz

Total power: 10W

Monitoring grounding circuit resistance: 0~100 Ω (can be pre-set according to user requirements, with an accuracy of 0.5 Ω)

◆ Intrinsic safety circuit * Output voltage: DC12V

Alarm output sound intensity:<90dB (buzzer)

◆ Linkage response time: ≤ 0.1s

Control contact capacity: AC250V*

Installation method: Wall mounted

Static grounding * Explosion proof mark:

◆ Ex ia IIC T4 Ga

SA-YF Mobile Electrostatic Grounding Alarm Operating Environment:

◆ Environmental temperature: -42 ℃~50 ℃

Relative humidity: ≤ 95% RH (25 ℃)

Atmospheric pressure: 80~110Kpa

Performance characteristics of electrostatic grounding alarm:

◆ Using reliable integrated circuits with stable and reliable anti-static and alarm performance

Quick response ability, when one of the clamp pins has poor contact, an alarm response is immediately triggered

When the resistance value of the grounding circuit exceeds the predetermined value (factory set value is 10 Ω), an automatic sound and light alarm will be triggered, and linkage control will be implemented

◆ Linkage control, two sets of switch contacts are sent to the electrical control pump and microcomputer quantitative loading instrument

◆ Intrinsically safe static grounding monitoring circuit

◆ Automatic monitoring to ensure the continuity of electrostatic grounding

◆ Provide output interfaces for networking with microcomputers

◆ No switch operation, 24-hour duty, low-power design, energy-saving and energy-efficient

◆ In the event of a power outage or fault alarm, it does not affect the release of static electricity

◆ Silicon aluminum alloy shell, surface electrostatic spraying

The clamp pin is made of tungsten carbide or alloy material, with high hardness, excellent conductivity, and strong ability to break paint and rust

◆ Adopting automatic shrinkage rubber cable or spiral cable working mode

Application scope of SA-YF mobile electrostatic grounding alarm:

Various mobile storage tanks such as automobile tank trucks and train tank trucks for petroleum and chemical plants

Other storage tanks or containers that require electrostatic grounding

SA-YF mobile electrostatic grounding alarm welcomes you to choose the product that suits you!