- Phone
-
Address
Room 1421, Building 1, Green Jing Business Plaza, Yuexi Street, Wuzhong District Economic Development Zone, Suzhou City, Jiangsu Province
Product Categories
Suzhou Qiling Precision Instrument Co., Ltd
Mitutoyo Thin Film Digital Micrometer 422-232-30
NegotiableUpdate on 07/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Sanfeng Mitutoyo thin film digital micrometer 422-232-30 $r $n resolution: 0.001 mm $r $n division value: 0.0 mm $r $n parallelism: measurement range less than 75mm type is 3um $r $n measurement range greater than 75mm type is (3+R/100) um,
Product Details
Mitutoyo Thin Film Digital Micrometer 422-232-30
The end faces of the anvil and micrometer screw are thin sheet type, which can be used to measure the groove size of difficult to measure positions such as spline shafts and keyways.
● Hard alloy measurement surface can be used.
● Direct type micrometer screw type.
● Device with constant force measurement.
Mitutoyo, Japan: Micrometer, Digital Micrometer, Outer Micrometer, Digital Outer Micrometer, 0-25 Micrometer, 25-50 Micrometer, 50-75 Micrometer, 75-100 Micrometer, Waterproof Micrometer, Fast Forward Micrometer, Quick Micrometer, Force Micrometer, Ratchet Sleeve Micrometer, Reading Outer Micrometer, Straight Micrometer, Replacement Anvil Micrometer, Sliding Anvil Micrometer, Lightweight Micrometer, Gauge Micrometer, Caliper Micrometer, Thread Micrometer, Disc Micrometer, Common Normal Micrometer, Tooth Thickness Micrometer, Gear Micrometer, Paper Thickness Micrometer, Plate Thickness Micrometer, Wall Thickness Micrometer, Spline Micrometer ruler, small head micrometer, pointed claw micrometer, pointed end micrometer, V-type anvil micrometer, 3-channel micrometer, 5-groove micrometer, odd groove micrometer, wire tapping micrometer, tap micrometer, thin film micrometer, blade micrometer, blade micrometer, knife edge micrometer, can edge joint micrometer, crimping height micrometer, limit micrometer, lever micrometer, groove micrometer,
Thin film micrometer
422122 series direct entry micrometer screw type
Digital display type (LCD)
422-230-30,BLM-25MX,
422-231-30,BLM-50MX,
422-232-30,BLM-75MX,
422-233-30,BLM-100MX,
422-260-30,BLM-25MX/.4T,
422-261-30,BLM-50MX/.4T,
Mitutoyo Thin Film Digital Micrometer 422-232-30
Thin film micrometer 422 series - non rotating spindle type
The end faces of the anvil and spindle are thin sheet type, which can be used to measure the groove size of measurement positions such as spline shafts and keyways.
The ratchet locking device can maintain a constant force measurement.
10mm/rev fast spindle feed (QuickMike type).
Performance parameters (digital display type does not include quantization deviation)
Resolution *: 0.001 mm
Dividing value * *: 0.0lmm
Parallelism: Measurement range less than 75mm is 3um
The type with a measurement range greater than 75mm is (3+R/100) um,
R is the measurement range (mm). Decimal rounding
Display *: LCD display
Battery *: SR44 (1 unit), 938882
The battery life is approximately 1.2 years under normal use
*Digital display * * ordinary type
Digital display function
Origin setting, zeroing, data retention, automatic power on/off, data output
Warning: Low voltage, calculation error
Digital display option
05CZA662: SPC cable with data switch (1m)
05CZA663: SPC cable with data switch (2m)
06ADV380B: USB Direct Input Tool with Data Conversion (2m)
937387: QuickMike type SPC cable (1m)*
965013: QuickMike type SPC cable (2m)*
06ADV380E: USB Direct Input Tool with Data Conversion (2m)*
*Suitable for QuickMike type
*The product information is for reference only, and the model and technical parameters may be changed by the manufacturer at any time
Similar Product Recommend