Mitsubishi Heavy Industries Worm Gear Reducer SEHV160R-63

Mitsubishi Heavy Industries Worm Gear ReducerSEHV160R-63：

Shanghai Lingyouhui Technology Co., Ltd. is the agent of Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD in China and globally. Please feel free to inquire.

Mitsubishi Heavy Industries reducers are divided into single-stage reducers, two-stage reducers with helical gears, and two-stage reducers. They can be divided into hollow shaft and solid shaft based on the shaft output method. Hollow shaft speed ratio 5-50 single-stage reducer model numbers SUHA, SHVA, SOHA, two-stage reducer with helical gear speed ratio 63-250 models include SEUA, SEHA, SEOA, two-stage worm gear reducer speed ratio 315-1600 models include SCUA, SCHA, SCOA; Solid shaft base installation: Single stage speed ratios of 5-50 models include SUHW, SHVW, SOHW, and two-stage helical gear reducers with speed ratios of 63-250 models include SEUH, SEHV, and SEOH; The two-stage reducer models with a speed ratio of 315-1600 include SCUH, SCHV, and SCOH.

Mitsubishi Heavy Industries Worm Gear ReducerSEHV160R-63：

MHI HASEG CO., LTD. is a member of Mitsubishi Heavy Industries Group, and Shanghai Lingyouhui Technology Co., Ltd. has introduced power transmission equipment from Mitsubishi Heavy Industries' power transmission department to China. On April 1, 2015, Mitsubishi Heavy Industries' power transmission department was reorganized into Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD., which focuses on the design, development, and production of large gearboxes. The reducer produced by Mitsubishi Heavy Industries Hasegawa MHI HASEG has the characteristics of adjustable backlash, five stage variable speed, stable rotation, low noise and low vibration. Widely used in precision machinery, steel rolling machinery, semiconductor manufacturing equipment, aerospace steel, rubber, printing, textile machinery and other industries.

1. Regularly check the oil levelBefore and during the operation of the gearbox, it is necessary to regularly check the oil level of the lubricating oil. The oil level should be within the range specified by the oil gauge. If the oil level is too low, lubricating oil should be replenished in a timely manner; If the oil level is too high, it may cause problems such as overheating and oil leakage in the gearbox, and the oil should be drained appropriately.

2. Regularly replace lubricating oilAccording to the user manual and operating conditions of the reducer, regularly replace the lubricating oil.When replacing lubricating oil, the old oil should be removedrowClean thoroughly and use professional methods to clean the oil pan and oil filter.

3. Check the oil temperature and operating soundDuring the operation of the gearbox, it is necessary to regularly check whether the oil temperature is normal. At the same time, pay attention to listening to the running sound of the gearbox. If there is any abnormal noise or vibration, stop the machine in time for inspection, identify the cause, and eliminate the fault.

4. Check the sealing areaRegularly inspect the sealing parts of the gearbox. If there is any oil leakage, the cause should be identified and dealt with in a timely manner. Oil leakage may be caused by damaged seals, loose bolts, or deformation of the casing. It is necessary to replace the seals, tighten the bolts, or repair the casing.

5. Check the connection partsCheck the connection parts between the reducer, motor, and load equipment, as well as the fixed parts such as anchor bolts, to ensure that the connection is firm and there is no looseness. If there is any looseness, it should be tightened in a timely manner to avoid affecting the transmission accuracy and causing equipment damage.

6. Clean the gearboxRegularly clean the casing of the gearbox, remove dust, oil stains, and debris from the surface, and maintain good heat dissipation of the gearbox. At the same time, it is necessary to clean the dust on components such as oil filters and cooling fans to ensure their normal operation.

7. Regular maintenanceAccording to the usage of the gearbox and the manufacturer's recommendations, conduct regular comprehensive maintenance on the gearbox. The maintenance includes checking the wear of gears, worm gears, and worm gears, measuring the clearance of bearings, and inspecting various performance indicators of the gearbox. For severely worn components, they should be replaced in a timely manner to ensure the performance and reliability of the gearbox.