Mitsubishi Heavy Industries Worm Gear Reducer SEHV160R-250

Mitsubishi Heavy Industries Worm Gear ReducerSEHV160R-250：

Shanghai Lingyouhui Technology Co., Ltd. is the agent of Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD in China and globally. Please feel free to inquire.

Mitsubishi Heavy Industries reducers are divided into single-stage reducers, two-stage reducers with helical gears, and two-stage reducers. They can be divided into hollow shaft and solid shaft based on the shaft output method. Hollow shaft speed ratio 5-50 single-stage reducer model numbers SUHA, SHVA, SOHA, two-stage reducer with helical gear speed ratio 63-250 models include SEUA, SEHA, SEOA, two-stage worm gear reducer speed ratio 315-1600 models include SCUA, SCHA, SCOA; Solid shaft base installation: Single stage speed ratios of 5-50 models include SUHW, SHVW, SOHW, and two-stage helical gear reducers with speed ratios of 63-250 models include SEUH, SEHV, and SEOH; The two-stage reducer models with a speed ratio of 315-1600 include SCUH, SCHV, and SCOH.

Mitsubishi Heavy Industries Worm Gear ReducerSEHV160R-250：

MHI HASEG CO., LTD. is a member of Mitsubishi Heavy Industries Group, and Shanghai Lingyouhui Technology Co., Ltd. has introduced power transmission equipment from Mitsubishi Heavy Industries' power transmission department to China. On April 1, 2015, Mitsubishi Heavy Industries' power transmission department was reorganized into Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD., which focuses on the design, development, and production of large gearboxes. The reducer produced by Mitsubishi Heavy Industries Hasegawa MHI HASEG has the characteristics of adjustable backlash, five stage variable speed, stable rotation, low noise and low vibration. Widely used in precision machinery, steel rolling machinery, semiconductor manufacturing equipment, aerospace steel, rubber, printing, textile machinery and other industries.

Maintenance method:

1. Regularly check the oil levelDuring the operation of the gearbox, the lubricating oil will decrease due to consumption. It is necessary to regularly check the oil level to ensure that it is within the range specified by the oil gauge. If the oil level is too low, the same type of lubricating oil should be replenished in a timely manner.

2. Regularly replace lubricating oil: ReducerReplace the lubricating oil according to the prescribed requirements. When changing the oil, the old oil inside the reducer should be drained first, and the reducer should be professionally cleaned before adding new lubricating oil.

3. Check the wear of the tooth surfaceRegularly open the observation hole of the gearbox to check the wear of the worm gear and worm gear teeth. If severe wear, obvious wear marks, cracks, or tooth surface peeling are found on the tooth surface, the worm gear should be replaced in a timely manner to avoid affecting the transmission performance and service life of the reducer.

4. Check bearings and sealsBearings and seals are vulnerable components in the gearbox and require regular inspection. If any looseness, abnormal noise or inflexibility of the bearing is found, the bearing should be replaced in a timely manner. At the same time, check whether there is any leakage in the seals. If aging or damage is found in the seals, they should be replaced in a timely manner to prevent lubricant leakage.

5. Clean the exterior of the gearboxRegularly clean the exterior of the gearbox to remove dust, oil stains, and debris from the surface for better heat dissipation. Generally clean once a week or month, using a clean cloth or brush to avoid scratching the surface of the gearbox with sharp tools.

6. Tightening connectorsRegularly inspect the various connecting components of the gearbox to ensure that they are securely fastened. If loose bolts are found, they should be tightened in a timely manner to prevent vibration or damage to the gearbox caused by loose connectors.

7. Check the running sound and temperatureDuring the operation of the gearbox, it shouldoftenAttentionitsIf any abnormal noise or vibration is detected during operation, the machine should be stopped promptly for inspection and troubleshooting. At the same time, pay attention to the operating temperature of the gearbox. Under normal circumstances, the oil temperature of the gearbox should not exceed the specified temperature. If the oil temperature is found to be too high, check whether the lubricating oil is sufficient and whether the heat dissipation is good.