Mitsubishi Heavy Industries Worm Gear Reducer SEHV125R-160

Mitsubishi Heavy Industries Worm Gear ReducerSEHV125R-160：

Shanghai Lingyouhui Technology Co., Ltd. is the agent of Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD in China and globally. Please feel free to inquire.

Mitsubishi Heavy Industries reducers are divided into single-stage reducers, two-stage reducers with helical gears, and two-stage reducers. They can be divided into hollow shaft and solid shaft based on the shaft output method. Hollow shaft speed ratio 5-50 single-stage reducer model numbers SUHA, SHVA, SOHA, two-stage reducer with helical gear speed ratio 63-250 models include SEUA, SEHA, SEOA, two-stage worm gear reducer speed ratio 315-1600 models include SCUA, SCHA, SCOA; Solid shaft base installation: Single stage speed ratios of 5-50 models include SUHW, SHVW, SOHW, and two-stage helical gear reducers with speed ratios of 63-250 models include SEUH, SEHV, and SEOH; The two-stage reducer models with a speed ratio of 315-1600 include SCUH, SCHV, and SCOH.

Mitsubishi Heavy Industries Worm Gear ReducerSEHV125R-160：

MHI HASEG CO., LTD. is a member of Mitsubishi Heavy Industries Group, and Shanghai Lingyouhui Technology Co., Ltd. has introduced power transmission equipment from Mitsubishi Heavy Industries' power transmission department to China. On April 1, 2015, Mitsubishi Heavy Industries' power transmission department was reorganized into Mitsubishi Heavy Industries Hasegawa Co., Ltd. MHI HASEG CO., LTD., which focuses on the design, development, and production of large gearboxes. The reducer produced by Mitsubishi Heavy Industries Hasegawa MHI HASEG has the characteristics of adjustable backlash, five stage variable speed, stable rotation, low noise and low vibration. Widely used in precision machinery, steel rolling machinery, semiconductor manufacturing equipment, aerospace steel, rubber, printing, textile machinery and other industries.

1. Establish lubrication maintenance systemThe maintenance of the gearbox can be carried out according to the "five determinations" principle of lubrication work, ensuring that each gearbox is regularly inspected by a responsible person. If obvious temperature rise, decreased oil quality, foreign objects found in the oil, or abnormal noise are found, the use should be stopped immediately, and timely maintenance, troubleshooting, and replacement of lubricating oil should be carried out. When refueling, pay attention to the oil level to ensure that the gearbox is lubricated correctly.

2. Regularly inspect fastenersRegularly check the fasteners of the gearbox to ensure that they are not loose. If there is any looseness, tighten them in a timely manner to prevent vibration, noise, or affecting transmission accuracy due to looseness.

3. Check the wear and tear of the partsRegularly inspect the wear of components such as worm gears, worm gears, and shafts.

4. Keep cleanPay attention to keeping the appearance of the reducer clean, and promptly remove dust and dirt to facilitate heat dissipation. When the reducer is running, there should be no dust, water stains or other debris around the air inlet to prevent the internal pulling of the reducer, short circuiting of the medium or damage to the insulation layer of the wires.

5. Oil seal replacementThe reducer cannot be left for too long. If the oil seal is not immersed in lubricating oil after being left for too long, it is recommended to replace the oil seal.