Mingtuo Computer Pulling Machine

1. Introduction to spot suppliers:Mingtuo Computer Pulling MachineUsed for the determination of mechanical properties such as tension, compression, bending, shear, tearing, and peeling of various materials.

This machine is a gantry style frame with a novel and elegant appearance. Computer digital speed control system, equipped with force sensors and automatic elongation tracking device, with good stability. Electrical appliances use PCs and interface circuit boards for data acquisition, storage, processing, and printing of test results, which can calculate basic physical performance parameters of materials such as maximum force, yield force, average peel force, and maximum deformation. During the experiment, the microcomputer collects real-time force values and deformation signals, and the software displays the "force displacement" curve. After the experiment is completed, the parameters are automatically calculated, saved, and the user can print out the required report format.

2. Structural principle: The host consists of an electronic speed control system, transmission mechanism, force measurement system, and automatic elongation tracking device.

Electronic speed control system: This machine adopts AC speed control, corresponding to a stretching speed of 1-Xmm/min (X is the user's bottom requirement), and returns at the highest speed possible.

Transmission mechanism: The belt reduction motor drives the screw through a synchronous belt and pulley, and the two screws are synchronously driven by the synchronous belt pulley.

Force measurement system: The host mobile crossbeam is equipped with a force sensor (the sensor only receives vertical force, not torsion or direction finding force) to ensure accurate force measurement. During the test process, the force situation of the sample can be changed from the sensor to an electrical signal input.

Extension tracking device: This device is used to measure the deformation of the sample and can be tracked by an external tracker or an internal tracker. You don't need a tracker, it can be tracked by the built-in deformation device of the motor.

3. Main technical parameters of computer tensile machine

3.1 Force resolution: 0.01N

3.2 System accuracy: less than ± 0.1%

3.3 Speed range: 0-500mm/min (special requirements can be determined separately)

3.4 Maximum stroke of gripper: 800mm

3.5 Elongation tracking error: ± 0.01mm

3.6 Power Supply Voltage: AC220V ± 10% 50Hz

3.7 Dimensions (length x width x height): 670 x 600 x 1560

3.8 Net weight: 150KG

4. Characteristics of Aluminum Tensile Testing Machine

Auto reset: After the computer controls the test instruction, the system automatically resets to zero;

High intelligence: After the experiment is completed, the fracture is automatically identified and the fixture returns to its initial position automatically

Multifunctional: By changing different fixtures, different experiments can be conducted;

Automatic gear shifting: switch between different levels according to the size of the load;

Change speed: The test speed can be changed arbitrarily

Control method: Test force, test speed, displacement, strain and other test methods can be selected.

　　Mingtuo Computer Pulling MachineRecord test data throughout the entire process. Provide functions such as saving, comparing, and tracking services. You can use the mouse to freely find the force values and deformation data of the test curve point by point for analysis, and can zoom in and compare locally.

Multiple protection: It has automatic limit and overload automatic protection functions.

Automatic calculation: Automatically calculate various test results and can modify the report arbitrarily

Automatic Length Measurement: Equipped with a high-precision encoder, it automatically measures displacement stroke and inter point elongation.

High taste: Exquisite craftsmanship, smooth lines, coupled with high-precision software and hardware technology and integration capabilities, fully reflecting the manufacturing process and agile strength.

5. Configuration

1. Longmen double column.

2. One high-precision sensor

3. High precision photoelectric automatic tracker

4. The universal testing machine software has functions such as automatic calculation, storage, and comparison

5. Taiwan, China brand Dongli gear reducer integrated motor

6. German Thomson ball screw

7. Synchronous belt wheel drive, no noise, no vibration, smooth operation

8. Test fixture

9. 19 inch Tsinghua Tongfang LCD computer, HP color printer.