Millipore M Air T Air Microbial Detector

M Air TThe air microbiological detector adoptsUSPrecommendedSieve-ImpactionMethod: With uniquely designed culture dishes, you can prepare the required agar medium or use it yourselfMILLIPOREThe provided culture medium can quickly detect live airborne microorganisms in key areas. The operation steps are simple, just need to7Extract in minutes1000A liter of air sample.

Operation steps:
1.Remove the stainless steel mesh and install the culture medium plate
2.Remove the cover of the culture medium plate and the protective film on the agar surface
3.Reinstall the stainless steel mesh, press the button, and extract a quantitative air sample
4.Remove the stainless steel sieve and culture medium plate, cover with a lid, and count the bacterial count after cultivation.

Technical Specifications
■ Material:
Sampling head: anodized aluminum
Sampling sieve:316Lstainless steel
Host: Aluminum structure coated with epoxy resin
■ Size and weight:12.5cm(Long) ×10.5cm(Width) ×25.5cm(High),1.9kg(including battery)
■ Power specification: Voltage:220V/50Hz
Working conditions:
■ Environmental temperature:5～60℃
Relative humidity:<80%
Relative height:<3000m

1Completed1000LThe time for gas sampling is less than7Minutes, saving detection time
2Before adoption500LSampling speed140L/minAfterwards500LSampling speed180L/minThe variable order sampling technique compensates for the decrease in microbial capture rate caused by concave culture medium, ensuring stable and efficient capture rate
3Programmable to set sampling time and volume
4The number of sampling sieve holes has reached967Kong, in1-200CFUThere will be no overlapping of colonies within the range, and there is no need to perform any analysis on the resultsFellerproofread
5The amount of culture medium in the sampling petri dish is stable and there is a clear way to indicate the amount（20mL）Ensure uniform capture rate
6The outer side of the bottom of the sampling plate has a grid for easy reading by the operator
7Using standard rechargeable batteries, the single charge usage time is greater than7Hour; It can be powered by ordinary non rechargeable batteries or can be operated without batteries220V/50HzcommunicationACDirect power supply from charger
8Equipped with a standard three legged bracket threaded interface, it can be connected to a commercially available camera bracket for special height sampling

Main Features
● Easy to operate agar culture dishes
Pre installed tablet
Pre sterilization
Unique design ensures no pollution hazard during installation
● Minimum evaporation capacity
The amount of agar in the culture box（20gThe thickness is6mm）Minimize the evaporation of agar during microbial sampling.
The results are easy to read
M Air TThe screen of the air microbiological detection system includes967Pores optimize the microbial distribution of colonies on agar plates and avoid overlapping microbial colonies. No need to perform data analysis on the obtained dataFellerVerification can directly obtain the result. Unique grid design makes microbial reading more convenient
● High repeatability air sampling volume
M Air TThe unique design of the incubator ensures consistent sampling volume for each session.