Mesh belt sludge dryer

Mesh belt sludge dryer

Equipment advantages

1、 Reduce moisture content by more than 80% from 10%,

Has strong drying and reduction capabilities, with adjustable dry mud moisture content of ≤ 10% -50% and a reduction of over 80%, subverting traditional drying methods

The technical bottleneck of high moisture content and weak reduction ability in dry mud exists.

2、 1:3.5 dehumidification ratio twice the industry standard

Innovative four effect condensation dehumidification and drying technology, with a comprehensive dehumidification performance ratio of up to 4 Above 2kg/H2O/kw. h, drier than traditional low temperature

Energy saving of 50% is twice the industry standard.

3、 No odor emission, no need for deodorization

The entire equipment system adopts a closed design, with no odor overflow and no need for secondary additional cost installation of expensive deodorization systems. It can be directly installed in the factory area for centralized sludge disposal, and the condensed water can be discharged directly without secondary treatment.

4、 100% heat utilization without heat loss

All adopt a closed system design combined with heat pump heat recovery technology, with no heat loss and better system efficiency, which is different from open drying equipment that continuously removes moisture and heat, and continuously provides high temperature heating.

5、 As low as 180kw. h/T usage cost

The innovative four effect condensation dehumidification and drying technology has a comprehensive dehumidification performance ratio of over 3.5kg.H2O/kw. h, which is 50% more energy-efficient than traditional low-temperature drying and twice the industry standard.

6、 Low temperature is safer without dust hazards

Fully enclosed 40-75C low temperature operation, no need for nitrogen charging, oxygen content<12% during drying process, dust concentration<60g/m3, particle temperature<70C, no dust and explosion hazards, discharge temperature<50 ° C, no need for secondary cooling, can be stored directly.

Mesh belt sludge dryer

Equipment principle

Using the principle of low-temperature heat pump dehumidification, the wet sludge on the mesh belt is dehydrated, dried and reduced by convective hot air drying. The system is designed to be fully enclosed, and the drying hot air has no heat loss.

Mesh belt sludge dryer

application area

The mesh belt sludge dryer developed by Dezhou Xiongxin Environmental Protection Engineering Co., Ltd. can directly dry sludge with a moisture content of 83% to dry sludge with a moisture content of 10%~30%, reducing the amount by more than 80%; Environmentally friendly, low-energy consumption, no secondary pollution, widely used in municipal sludge and industrial sludge (printing and dyeing, papermaking, electroplating, chemical, leather, pharmaceutical, etc.) for drying and reduction. Dry sludge with a moisture content of 10%~30% can be gasified, co burned, composted or used as building materials for harmless resource disposal in the later stage.