Medical pressure steam sterilizer

High pressure sterilizer is a high-pressure sterilization equipment, belonging to pressure vessels, commonly used for sterilization of glassware, etc. Generally, the pressure reaches 0.15 kPa and the temperature is maintained at around 120 degrees Celsius for half an hour. It takes a total of two to three hours from heating up, insulation, and cooling down. High pressure sterilizer is a very commonly used sterilization equipment, which is needed for almost all applications involving microorganisms. It is very convenient to use, safe, efficient, and inexpensive, so it is widely used. Below are some examplesLarge steam sterilizerThe manufacturer will mainly introduce some issues that need to be paid attention to when using it.

1. Be careful not to burn when using a high-pressure sterilizer. As it is a high-temperature and high-pressure container, wear insulated gloves when using it to avoid burns. There have been many cases of burns in the past, so be sure not to get burned.

2. When heating up, turn on the exhaust switch. When the temperature reaches 70 degrees, turn off the exhaust and continue heating up. The purpose of doing this is to make the temperature rise faster, without cold air hiding inside, which is beneficial for sterilization. This is a crucial aspect.

3. During insulation, the temperature should reach the specified value. Some operators may neglect to start timing before the temperature is reached, which can lead to insufficient sterilization time and incomplete sterilization. It is necessary to constantly monitor the temperature and pressure situation. If it falls during the insulation and sterilization stage, the exhaust valve should be adjusted appropriately or the firepower should be increased.

4. During the cooling stage, do not cool down too quickly. If the exhaust valve is opened too wide, it can easily cause damage to the container inside, which is crucial.

5. Regular maintenance is required for high-pressure sterilizers. After prolonged use, many valves, instruments, gaskets, etc. need to be repaired and replaced, and cannot be used with defects.

6. Do not let the pressure and temperature become too high. Often, due to the operator's negligence, the temperature and pressure rise too quickly, resulting in excessive temperature. This can easily damage the equipment, so it is important to be careful and not be too careless.

High pressure sterilizers are excellent sterilization equipment. When using them, it is necessary to strictly follow the operating procedures, pay attention to safety, and strictly prohibit people from leaving the equipment during operation, as temperature and pressure can change at any time. In fact, the use of high-pressure sterilizers requires professional personnel to operate, and the sterilization process is also quite meticulous. These are all standard operating requirements, and all high-pressure sterilizers are similar in operation.