Material characteristics and working principle of MP FILTRI filter

Material characteristics and working principle of MP FILTRI filter

The MP FILTRI filter consists of simplified components, stainless steel filter screen, sewage section, transmission device, and electrical control section. When the filter is working, the water to be filtered flows through the water outlet filter through the MP FILTRI transmitter, MP jade filter element, and MP FILTRI agent. The MP filter passes through the filter screen and enters the user's required pipeline through the outlet for process circulation. The particles and impurities in the water are trapped inside the filter screen. In such a continuous cycle, more and more particles are intercepted, and the filtration speed slows down. However, the incoming sewage still enters, and the filter holes become smaller, resulting in a pressure difference between the inlet and outlet. When the large pressure difference reaches the set value, the differential pressure transmitter sends an electrical signal to the controller, and the control system starts the driving motor to drive the shaft to rotate through the transmission component. At the same time, the sewage outlet opens and is discharged from the sewage outlet. After the filter screen is cleaned, the pressure difference drops to the minimum value, and the system returns to the initial filtering state, and the system runs normally.
Accuracy: 5 microns
Material characteristics and working principle of MP FILTRI filter

Material: Glass fiber filter material
Filter media: hydraulic oil, lubricating oil, water ethylene glycol
Product Introduction: Yuqing Purification SMF series double tube medium pressure filter is a product that can be installed on the high-pressure pipeline of the oil pump outlet in hydraulic systems for filtration. This filter consists of two single cylinder filters, a directional valve, a differential pressure transmitter, etc., and is used to filter solid particles in oil
MP FILTRI Jade Double Tube Medium Pressure Filter Product Overview
MP FILTRI jade dual tube medium pressure filter is a product that can be installed on the high-pressure pipeline of the oil pump outlet in hydraulic systems for filtration. This filter consists of two single cylinder filters, a directional valve, a differential pressure transmitter, etc. It is used to filter solid particles, impurities, and colloids in oil and is suitable for automatic control systems and servo systems. The Yuqing Purification SMF series dual tube high-pressure filter can prevent premature wear or jamming of high-precision components due to impurity contamination, extending the service life of the components. This series of filters uses deep type filter materials‐ — Fiberglass has various advantages such as high precision, high flux, low original pressure loss, and large pollutant carrying capacity.
HP-065-3-M25-A-N-P01 Filter
SF2-504-A-F1-SM250-E1 Filter
MPH-850-1-C-D-S-A-F1-A10-EC-1 Filter
SF2-250-A-F1-SM250-E1 Filter
MPH-100-4-C-D-S-A-G3-A10-EC-1 Filter
FHB-065-3-B-A-F1-A10-N-E7 Filter
MP FILTRI transmitter, MP jade filter element, MP FILTRI agent, MP filter