Manufacturer wholesale LMA linear guide rail robotic arm dedicated LSAC15VN low assembly Longma linear guide rail

Manufacturer wholesale LMA linear guide rail robotic arm dedicated LSAC15VN low assembly Longma linear guide rail
Longma/LMA linear guide is a type of rolling guide that utilizes steel balls to perform infinite rolling cycles between the slider and slide rail, allowing the load platform to easily move linearly with high precision along the slide rail. And it can be interchanged with the silver guide rail, and the installation size is exactly the same!

Longma linear slide railCompared with traditional sliding guidance, the friction coefficient of rolling guidance can be reduced to 1/50 of the original. Due to the greatly reduced starting friction, there are relatively fewer ineffective movements, making it easy to achieve μ m level feed and positioning. In addition, the design of the binding unit between the slider and the slide rail allows the linear guide rail to simultaneously bear loads in various directions such as up, down, left, and right. The above display characteristics are not comparable to traditional sliding guides. Therefore, if the machine can be equipped with ball screws and use linear guides as guides, it will greatly improve equipment accuracy and mechanical efficiency.

LMA linear guide rail, also known as Longma linear guide rail, linear slide rail, or linear slide rail, is a tool that is tightly assembled with one or more sliders and slides for linear transmission. Has the following advantages:

1. High precision: Due to the extremely low friction force during linear sliding, it belongs to rolling friction and only requires minimal power to drive the bed. As the friction force is small, the heat generated by friction is minimal. Compared with traditional sliding methods, it can significantly reduce the wear of the contact surface of the running track, thus maintaining high positioning accuracy and walking accuracy for a long time with low wear.

2. High rigidity: Due to the four-way equal load design of the slide rail and track, they must have sufficient resistance strength to loads from all directions, have the ability to automatically adjust center, allow for larger installation errors, make processing easier, and apply sufficient preload to achieve high rigidity.

3. Easy maintenance and upkeep: Compared to traditional sliding systems, there are actions such as scraping or grinding the running track surface. The wear caused by sliding often requires the machine to be scraped or ground again after a period of time, which is time-consuming and costly. If replaced or repaired, it can greatly restore the walking accuracy of the machine.

4. High speed performance: Due to the rolling point contact between the slider and the track and steel balls, the friction coefficient is small and it is not easy to generate heat. Therefore, only minimal power is required to drive the machine operation. Because the required driving force is small and the power consumption is low, it is more suitable for high-speed operation than sliding devices.

5. High smoothness: The LMA/Longma linear sliding rail slide seat steel ball loop adopts a special patented design for smooth running trajectory, which can effectively improve the smoothness of the sliding rail assembly.

High stability: The LMA/Longma linear slide rail slide seat adopts a special patented design that can increase material thickness, improve the strength of spare parts, and make the slide seat less prone to deformation, effectively improving stability.

6. High durability: LMA/Longma linear slide railThe slide rail assembly adopts a special contact point design, which not only has high rigidity but also has the function of automatic adjustment, which can evenly distribute the force in all directions, thereby greatly improving the service life and accuracy of the slide rail assembly.

7. High convenience: TBI slide rail assembly is easy to assemble without the need for special assembly tools, and users can easily get started. The dustproof design is interchangeable, and the upper and lower dustproof can be shared with each other to achieve high efficiency, energy conservation, and environmental protection.

LMA linear guide railModel specifications:

High assembly series: LSAH15VN LSAH20VN LSAH20VE LSAH25VN LSAH25VE LSAH30VN LSAH30VE LSAH35VN LSAH35VE LSAH45VN LSAH55VN LSAH55VE LSAH65NV LSAH65VE

Low assembly series: LSAC15VS LSAC15VN LSAC20VS LSAC20VN LSAC25VS LSAC25VN LSAC30VS LSAC30VN LSAC35VS LSAC35VN

Longma linear slide railIt can be interchanged with Taiwan Shangyin, TBI, STAF, PMI, CPC and ABBA. The installation size is the same, the supply cycle is short, and the cost performance is high. Customers who need it are welcome to call to inquire and order! Our company also provides a large amount of spot goods for Taiwan's original silver, TBI, PMI brand linear guides, ball screws, cutting of any length, and customized shaft ends!National toll free hotline: 075-3396-7916 24-hour service hotline: 15217037939 online QQ; 1935181962 Miss LiuLooking forward to your call!