Manual torque wrench calibration device 50-100N wrench measuring instrument

Manual torque wrench calibration device 50-100N wrench measuring instrument

This product is sold by Shanghai Zhuheng manufacturermanualTorque wrench calibration deviceIt has high precision, high resolution, fast sampling speed, full screen display, and uses high-precision torque sensors with torque direction reminders.Manual torque wrench calibration deviceComposed of high-precision torque sensors and support brackets. It has stable testing, rich functions, and easy operation.Manual torque wrench calibration deviceIt has been applied in manufacturing industries and testing departments such as electricity, light industry, machinery, engines, internal combustion engines, electric vehicles, motorcycles, automobiles, ships, airplanes, etc.

Manual torque wrench calibration devicepicture

Manual torque wrench calibration deviceSpecification Model

Manual torque wrench calibration devicepurpose

It is a torque wrench equipment used for testing fixed torque wrenches, digital torque wrenches, preset torque wrenches, torque screwdrivers, screwdrivers, and instruments and products related to tightening.

Manual torque wrench calibration deviceFeatures
1. High precision, high resolution, fast sampling speed, full screen display.
2. Adopting high-precision torque sensors with torque direction reminders.
3. 7-inch touchscreen display with peak hold function.
4. Four units are interchangeable and available for selection (N · m, kgf · cm, lbf · in, lbf · ft).
5. The real-time and peak modes can be switched freely.
6. Real time display, dial display, curve display.
7. Real time display of time and date.
8. Set up up and down reminders.
9. It can store peak data, and the data stored inside can be viewed or exported from a USB drive.
10. The interface displays in both Chinese and English, and can be freely switched according to needs.
11. Corresponding numbers can be set according to the torque wrench.

Picture of dial torque wrench calibrator

Manual torque wrench calibration deviceSwitch between Chinese and English

Manual torque wrench calibration deviceMain page display

Curve and pointer display interface

Data storage interface

Manual torque wrench calibration deviceLCD touch screen display interface diagram:
1. Switching between Chinese and English
2. The main interface displays:
3. Curve and pointer display interface:
4. Data storage interface
1. Function buttons
a、 Unit key. When the current unit cannot test the requirements, click on the unit position to display the units in sequence
（N·m、kgf·cm、lbf·in、lbf·ft）， Can be switched alternately.
b、 Peak key, default to real-time value. If peak value is needed, click on it and switch between real-time and peak values alternately.
c、 Zero key, press this key in real-time to return to zero position.
d、 Switch key, press this key to enter the dial and curve display interface.
e、 The storage key can store the current value, and the view key can be used to query the stored data.
F、 Menu button, enter menu button, can calibrate and debug the device (non personnel cannot enter casually)
2. Power interface: Connect the instrument to a power source (this instrument can be directly plugged into a 220V power source).
3. Four sided hole: connected to the four sided measuring head of the tested object.
4. Tested objects: such as dial torque wrenches, preset torque wrenches, etc.
5. Handwheel: Rotate the handwheel to perform the inspection.

Manual torque wrench calibration devicecomponent composition
Plan schematic diagram of SGCMY series torque wrench calibrator:
1. Sensor head: At the factory, several conversion test heads are equipped according to the size of the torque wrench square head, which are connected to the square measuring head of the tested object;
2- Display: Touch screen display window can set and display twist values, etc;
3- Horizontal support rod;
4- Screw;
5-Height adjustment knob: The platform height can be adjusted to keep the torque wrench being tested in a horizontal state. If it is not in a horizontal state, it may cause measurement errors; Left and right adjustment buttons: Adjust the testing platform to fit the arm length of the torque wrench being tested, and also adjust the direction of the testing platform to adapt to the forward and reverse measurement of the torque wrench;
6-Drive handwheel: Load or unload the tested torque wrench in both directions

Working environment of torque wrench calibrator
1. Operating temperature: -10 ℃~40 ℃.
2. Operating humidity: ≤ 90% RH.
3. There is no vibration source or corrosive environment around.
8、 Operation steps
1. Connect the power cord and insert it into the square socket.
2. Turn on the hard switch.
3. Place the tested object in place and place the square probe of the tested object into the four sided hole of the calibration instrument.
4. The tail of the tested object does not touch any foreign objects, adjust the height and length adjustment blocks, and reset the display screen.
5. Shake the handwheel to start the inspection.
6. To change units during testing, press the 'Unit Switch' button to switch between the four units. Press once to switch one unit.

Torque wrench calibrator for bearing square hole size
Do not collide with the square holes at will to avoid damage. The following is a plan view of the square shaped hole:

≌≌ After sales service ≌≌
If consumers encounter quality problems during normal and reasonable use of our domestic products within one year of purchase and use, they can go to the sales point to request repair, exchange or return. If quality problems are found during the warranty period of specific warranty items, they may request replacement or return, but it must be under reasonable and normal use conditions.
From time to time when consumers obtain the previous service, they can directly report the situation or make requests to our factory by letter or phone, or send domestic products to our factory for processing. Our factory will make reasonable arrangements with a serious attitude.
If the damage is caused by improper use by the consumer, as long as the situation is truthfully reported and can be repaired, our factory will provide satisfactory service without charging or reducing the production cost. This type of situation must be handled directly with the factory.
Each sales point must provide services to consumers with seriousness and enthusiasm.

Related recommendations:扭力扳手型号 Torque wrench tester Dynamic torque tester Torque multiplier Micro pressure gauge Electronic pressure tester Standard dynamometer Digital Pressure Gauge Motor speed tester Electric torque meter Digital display torque wrench Micro scale dynamometerDigital force gauge tension tester Pipe clamp torque wrench Can be connected to a computer torque wrench

Manual torque wrench calibration device 50-100N wrench measuring instrument