MS6915 thermocouple input isolation safety barrier (intelligent/one in two out)

MS6915Thermocouple input isolation safety barrier (intelligent type)/One in, two out

1characteristic

· 1enter2go out

·Intrinsic safety input

·apply toK、E、S、BWaiting for thermocouple

·Can be programmed to set input type and range

·Isolated output4～20mAperhaps1~5V

2、 Overview

1This isolation safety barrier is suitable for thermocouple signal input in hazardous areas on site, and has been isolated,Convert into standard current or voltage signals and output them to the control system or other instruments in the safe zone.

2It is an intelligent temperature transmission isolation safety barrier,Can be achieved throughPCThe machine and control software are programmed to set the input thermocouple type and range.

3Input all the way,Two outputs. The isolation safety barrier is powered by an independent DC power supply-input-Isolation between outputs.

4The temperature transmission isolation safety barrier can be integrated with the unit combination instrument andDCS、PLCUsed in conjunction with various temperature detection and control systems in industrial production processes.

5Standard35mmDINRail card installation. Plug and unplug terminal block,Spring compression connection.

3、 Technical specifications

●input(intrinsically safe)

Input type:K、E、S、B、R、T、N、W、JWaiting for various types of thermocouples

Temperature range: depends on the type of sensor used(Refer to the range table)

Millivolt signal: -10～+100mVrange

***Small millivolt range:5mV

●output

Output signal:4～20mA,1～5V,Or other designated signals

Load resistance: current4~20mAperhaps4~20mAWhen outputting, ≤550Ω

voltage1~5V、0~5Vperhaps0~10VWhen outputting,load≥100KΩ

●power supply

Supply voltage range:20～30VDC

Rated supply voltage:24VDC

***High current consumption:<35mA

●Conventional comprehensive parameters

Standard accuracy:±0.1%(Refer to the thermocouple range and measurement error table)

Cold end compensation accuracy:±1℃ (Compensation range-15~+75℃)

(The cold end compensation resistor has been installed inside the isolation safety barrier)

Temperature drift: basic error/10℃

Response time:<1s

Isolation ability: Input-output-Between power sources2.5KV,1min ,50Hz

Insulation resistance: input-output-Between power sources≥100MΩ / 500VDC

Shell material:PC(polycarbonate)material

External dimensions:16×116×110(mm)

Working environment temperature: -20～＋60℃

Suitable for connecting on-site equipment and hazardous areas: thermocouple temperature sensor

0District1District2District;IIA、IIB、IIC

●Explosion proof certification parameters

Explosion proof grade mark:IIC

***Great safety voltage(Um)：250VAC/DC

(terminal1-2) Uo: 4.6V Io: 40mA Po: 0.05W Lo: 14 mH Co: 100μF

(terminal2-3) Uo: 4.6V Io: 290mA Po: 0.34W Lo: 0.21mH Co: 100μF

4Model code

5、 Terminal wiring diagram