MQ9-26 gas booster fan

NegotiableUpdate on 04/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product description: 9-26 series pressurized gas fan 1. Details: The 9-26 high-pressure fan is generally used for forging furnaces and high-pressure forced ventilation, and can be widely used for conveying materials, conveying air, and gases that are non corrosive, non self igniting, and do not contain viscous substances. The temperature of the medium generally does not exceed 80 ℃, and the dust and hard particles contained in the medium do not exceed 150mg/m ³. For the transportation of flammable and explosive gases, the impeller can be made of aluminum alloy to prevent sparks during operation. The motor used is an explosion-proof motor with the same performance parameters as ordinary motors. This type of wind turbine is effective

Product Details

9-26 series pressurized gas fan

1、 Details introduction:

9-26 type high-pressure fan is generally used for forging furnaces and high-pressure forced ventilation, and can be widely used for conveying materials, conveying air, and gases that are non corrosive, non self igniting, and do not contain viscous substances. The temperature of the medium generally does not exceed80℃，The dust and hard particles contained in the medium shall not exceed 150mg/m ³. For the transportation of flammable and explosive gases, the impeller can be made of aluminum alloy to prevent sparks during operation. The motor used is an explosion-proof motor with the same performance parameters as ordinary motors. This type of fan has high efficiency, low noise, flat performance curve, and a wide high-efficiency zone.

2、 Product features:

1. It can output higher gas pressure and provide more gas flow at the same time, with lower noise.

2. When using an integral bracket, installation is very simple and requires little support from professional technicians.

3. The motor shaft is elastically connected to the transmission shaft, and there is no need to frequently tighten or replace the belt, resulting in low maintenance workload.

4. Fan systems with impeller diameters below 1400mm that operate at room temperature do not require additional bearing cooling devices, reducing user investment and maintenance workload.

5. When the airflow resistance increases, the motor load will automatically decrease without burning out the motor.

6. Made of high-quality carbon steel, stainless steel or other metal materials can also be used according to user requirements.

7. After production is completed, it has undergone operational testing and vibration value detection, ensuring reliable operation.

Dust removal fan, high-temperature fan, boiler induced draft fan, desulfurization and denitrification fan, centrifugal fan should identify the "Xima fan". Professional manufacturer of centrifugal fans, ensuring product quality and complete specifications! For more specifications and price details of centrifugal fans, please consult Manager Wang