MP FILTRI pipeline oil suction filter electric transmitter

MP FILTRI pipeline oil suction filter electric transmitter
The MP FILTRI pipeline oil suction filter system is a lightweight and sturdy oil suction filter with an aluminum alloy shell, filter element, bypass valve, visual transmitter, and electric transmitter. It is installed vertically on the pipeline outside the fuel tank, without affecting the layout of the pipeline, and the size of the fuel tank is not limited by the filter. This series of oil suction filters has the following characteristics:
(a) Equipped with a visual sensor: When the filter element is gradually blocked by pollutants, the red signal ring in the observation window of the visual sensor slowly rises. When the red signal ring rises to a high position (red in the observation window), it indicates that the filter element has been blocked by pollutants to the point where it needs to be cleaned or replaced.
After cleaning or replacing the filter element, press the reset button to make the red signal ring slide down; MP FILTRI, MP FILTRI Proxy
(b) Electric transmitter: When the filter element is blocked by pollutants and the vacuum at the oil outlet is -0.018MPa, the micro switch inside the transmitter will actuate, sending a switch signal indicating that the filter element should be cleaned or replaced. If the machine cannot be stopped immediately or no one comes to replace the filter element, the side valve located inside the filter cover will automatically open (opening pressure: vacuum degree -0.02MPa);
(c) Equipped with a bypass valve: When the filter element is contaminated and blocked to the outlet pressure (vacuum degree -0.02MPa), the bypass valve will automatically open to prevent faults such as suction in the oil pump.
MP FILTRI pipeline oil suction filter electric transmitter

MPFILTRI miniature valve body filter generally refers to filter elements welded by vacuum electron beam, and can also refer to filter elements with a diameter less than 20mm, a minimum diameter of up to 5mm, and a length less than 100mm.
It is commonly used for filtering hydraulic oil or gas in various precision servo valves in hydraulic and pneumatic control systems, with high precision, good strength and rigidity, low resistance, high flow rate, and self-cleaning properties
Featuring high cleanliness, easy use, stable filter holes, and long service life, it can replace bronze powder sintered filter cartridges (first generation valve filters) and skeleton coated metal mesh filter cartridges (second generation)
The use of substitute valve filters and imported metal wire wound filter cartridges has made servo systems more stable and reliable, and has been widely applied in fields such as aerospace, hydraulic machinery, precision machine tools, and automatic control. MPFILTRI
Characteristics of Italian MPFILTRI Jade Micro Valve Body Filter Cartridge Product Features:
1. Welding depth, small error, and high weld strength;
2. The weld seam is narrow, usually only 1-1.5mm, which is very suitable for the manufacturing of small-sized filter cartridges (solving previously impossible problems);
3. Small deformation, high qualification rate, and stable quality;
4. Due to non oxidizing welding, fine weld seams, and aesthetically pleasing components;
5. Can replace imports and be used for *.