MP-2B metallographic sample grinding and polishing machine, Agiewe

MP-2B metallographic sample grinding and polishing machine, AgieweIn the process of preparing metallographic specimens, polishing and grinding are two very important processes. Usually, two types of equipment, metallographic specimen pre grinding machine and metallographic specimen polishing machine, are used to complete them. In order to meet the needs of China's industrial and technological development and meet the user's requirements, our company has newly designed and manufactured a metallographic specimen polishing machine. The machine has a novel and beautiful appearance, and the collection tray and shell are made of thickened ABS plastic vacuum forming technology as a whole. The machine is durable and easy to maintain. This machine adopts a vector frequency converter with a large range speed regulation, which adapts to the different speed requirements of grinding and polishing during the sample preparation process (the speed between 50-1000 revolutions per minute can be adjusted arbitrarily), and can be adjusted in both directions according to user habits, making this machine more widely applicable. It is a device used by users to make metallographic samples. The speed of the left and right disks of this machine is synchronously adjusted to the same speed, and the dual disks can simultaneously grind and polish the samples. When in use, only the grinding disk sandpaper and polishing cloth need to be replaced to complete various processes such as rough grinding, fine grinding, dry grinding, wet grinding, and polishing of the samples. To expand the sample preparation requirements for different samples, the grinding and throwing disc diameters of this machine are larger than those of similar domestic products. There are more options for different line speeds on the working surface, which can increase the effective working surface and improve the grinding and polishing quality of the sample as well as the sample preparation efficiency. Moreover, the machine rotates smoothly with low noise, making it an ideal and fully functional metallographic sampling equipment.

MP-2B metallographic sample grindingThrowing machine EgwayInstrument features:

1. The machine has a novel and beautiful appearance, and the collection tray and outer cover are made of ABS thickened material through integral vacuum forming.

2. The surface of the shell is treated with four layers of car spray coating technology, which has a bright and stain resistant appearance. Surface stains are easy to maintain, and the machine is durable and easy to maintain.

3. The motor of this machine adopts a fully copper coil motor, which rotates smoothly, has low noise, and has a long service life.

4. The water faucet is made of all copper material, with good hand feel, long service life, and no rust.

5. This machine has a large disk diameter, small bounce, high sample preparation efficiency, and good results.

6. This machine adopts a vector frequency converter with sufficient power and a large speed range to adapt to different speed requirements during the sample preparation process.

7. This machine has the function of adjusting the forward and backward directions according to usage habits.