MODEL7100 Zirconia Oxygen Analyzer

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MODEL7100 zirconia oxygen analyzer adopts a miniature zirconia sensor. The built-in sensor makes the entire instrument have the advantages of small size, fast response time, long lifespan, low price, long-term stability, and long calibration cycle.

Product Details

MODEL7100 Zirconia Oxygen AnalyzerProduct Features:

● Small size, easy installation, and simple operation
● Long lifespan
● Short preheating time: 2 minutes
● Can be exposed to the air
The oxygen content can be reduced from percentage to PPm in just 15 seconds
● High brightness ultra large LED digital display
● Multiple output modes
● Low price

MODEL7100 Zirconia Oxygen AnalyzerTechnical parameters:

sensor	Internal/External Zirconia Sensor
Measurement range	0-10ppm/0-100ppm/0-1000ppm
display	0.75 "(19.05mm) LED digital display, system status LED indicator light: yellow light in case of fault, green light in normal and online measurement. Alarm 1 and 2 alarm indicator lights.
response time	<15 seconds T90
precision	± 3ppm at 0-50ppm constant temperature and pressure range of 0-2000ppm ± 5ppm within 51-500ppm ± 10ppm between 501-2000ppm
Operating temperature	5-45℃
signal output	RS-232 communication interface, 4-20mA (load 500 Ω), 0-10VDC (Or 0-1VDC, 0-5DC)
alarm output	Two alarm relay outputs that can be set as upper and lower limit alarms
warm-up time	about 2 minutes
Sample gas interface	1/8 '' NPT internal thread
Sample gas flow rate	1.4-2.0 l/min
electrical connection	Pluggable electrical connection terminal block
working power supply	10W 90/250VAC 50/60Hz or 12-30VDC
protection level	Panel: NEMA 4, IP66 Machine box: NEMA1, IP20
quality assurance	1 year
weight	Analyzer: less than 0.9kg

price