MG150/345-W coal mining machine

MG150/345-WProduct Introduction of Type Coal Mining Machine

MG150/345-WThe thin coal seam hydraulic traction coal mining machine is a multi motor horizontally arranged hydraulic chainless traction coal mining machine, with a total installed power of the machine345kWTraction power45kWThe hydraulic stepless speed regulation system is used to control the traction speed of the coal mining machine.

MG150/345-WThe coal mining machine consists of two main boxes on the left and right sides, connected by high-strength hydraulic bolts. The left box body includes the left walking part and the electronic control part,The right box body includes the traction motor, right walking part, and hydraulic pump box. This structure is simple, reliable, with a small overall size and low body height, suitable for thin coal seam mining. The multi motor drive adopts a horizontal layout form, which is easy to disassemble and assemble. A traction motor is installed horizontally in the right box of the main body, which provides traction for the coal mining machine through the traction mechanism300kNThe traction force. The control panel of the coal mining machine is located in the electric control compartment of the left box body of the main engine. Except for the oil motor, all hydraulic components are installed in the hydraulic pump box. The hydraulic adjuster sets it on the left and right sides of the main body to control the lifting and lowering of the left and right rocker arms of the coal mining machine.

MG150/345-WThe significance of the type of coal mining machine model

model:MG150/345-WType coal mining machine;

MG——Coal mining machine code:

M- Coal mining machineG- Roller type;

150——Cutting motor power（kW）；

345——Total installed power（kW）；

W——Chainless hydraulic traction.

MG150/345-WOperating environment of type coal mining machine

1It can be used in mines where the methane, coal dust, hydrogen sulfide, carbon dioxide, and other substances in the surrounding air do not exceed the safe content specified in the Coal Mine Safety Regulations.

2The altitude is less than2000m.

3The temperature of the surrounding medium does not exceed+40℃, not less than-10℃.

4The ambient temperature is+25At ℃, the relative humidity of the surrounding air is not greater than97%.

5There is no gas or conductive dust in the surrounding medium that can corrode or damage the insulation.

MG150/345-WStructural characteristics of type coal mining machine

1. The host is connected to two boxes on the left and right sides using high-strength hydraulic bolts. This structure is simple and reliable, easy to disassemble and assemble, and has a small size, greatly reducing the height of the coal mining machine, making it suitable for thin coal seam mining.

2The cutting motor is horizontally arranged on the rocker arm, and there is no power transmission between the rocker arm and the body, eliminating the spiral umbrella gear and the complex structure of the shaft.

3The hydraulic system adopts an inclined shaft plunger motor, and the main components are universal with mature coal mining machines. The system has high efficiency, low failure rate, and good interchangeability.

4The main components can be extracted from the old pond side without affecting other components, making replacement easy and maintenance convenient.

5The electrical primary control of the coal mining machine adopts a programmable controller（PLC）To achieve this, with Chinese display function, it can display the normal operation status of the coal mining machine and indicate electrical control faults,Convenient for maintenance.

Physical picture of MG150/345-W coal mining machine

Due to differences in production batches and specific models, the above pictures are for reference only. For more details, please contact our sales personnel for specific verification

customer satisfaction questionnaire