- Phone
-
Address
No. 238 Chaowang Road, Gongshu District, Hangzhou City
Product Categories
Hangzhou Jiawei Innovation Technology Co., Ltd
MF-1000 thin film evaporator
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The thin film structure of MF-1000 thin film evaporator has a short heating time, only a few minutes, and the sample can be concentrated in a state where there is almost no thermal decomposition. Z is suitable for samples that are prone to thermal change (thermal decomposition). By utilizing the centrifugal and stirring effects of the fan, a uniform thin film is formed on the evaporation surface, which can concentrate substances that are prone to bubble formation and have strong viscosity. The rotating blades are directly connected to a high torque fixed DC brushless motor, which can concentrate high viscosity samples. The material of the evaporator tube is transparent hard glass, which can observe the concentration state.
Product Details
MF-1000 thin film evaporatorCharacteristics:
F seriesrowMF-1000 thin film evaporatorTechnical features:
★An independent control loop is used to manage the heating time, and heat sensitive substances can also be concentrated in the * state
★Circulating warm water through a glass water jacket to heat the evaporator tube, with accurate temperature control and easy observation of the concentration state
★The recovery bottles for distilled liquid concentrate are equipped with drain plugs, which can be operated to remove the sample and achieve continuous operation
★The rotating blades are directly connected to a high torque fixed DC brushless motor,Can concentrate high viscosity samples.
★There are also specifications suitable for high temperatures,The maximum set temperature can reach200℃.
Rotation speed range: 140~1200rpm (continuously variable transmission)
Evaporation capacity: 1140mL/h (circulating water and warm water at 70 ℃)
Reaching vacuum level: Vacuum pump capacity+133.3Pa (1Torr)
Temperature setting range: Room temperature+5-180 ℃ (MF-10C)
Rotation setting · Display: Film type key input setting · Digital display
Anti slip pad for rotating shaft: vacuum anti slip pad
Evaporation tube: water jacket heating type, evaporation area 0.04 cubic meters (MF-10A • B)
Condenser: Vertical double serpentine tube, cooling area of 0.3 square meters
Heating section: Type A and B require an external constant temperature bath, while Type C requires an 800W quartz heater
Recycling bottle: 1L × 2 (with drain plug)
External dimensions and weight: 625W × 400D × 1416H · approximately 40kg
Product Features:
1. The thin film concentration device is mainly used for the concentration and refining of high viscosity substances, easily foaming substances, and thermosensitive substances, with high concentration efficiency;
2. The rotating blades of the MF-10 series thin film evaporation device are directly connected to a high torque fixed DC brushless motor, which can concentrate high viscosity samples;
3. The material of the evaporator tube is transparent hard glass, which can observe the concentration state;
4. The MF-10C model uses a covered resistance heater and stainless steel evaporator tube for high-temperature experiments. The maximum set temperature can reach 180 ℃;
5. The MF-10B model is equipped with a liquid level sensor, which can control the injection amount of the sample.
