M18 photoelectric switch - reflective type

photoelectric sensor photosensor			PR series metal cylindrical Cylindrical metal
characteristic feature			The circuit protection function is complete, the metal shell is sturdy and durable, the detection distance is long, and the voltage supply is wide.
Detecting distance/Sensing distance			6M
Output Output	NPN	NO	PRM18-T6TN1
		NC	PRM18-T6TN2
		NO+NC	PRM18-T6TN
	PNP	NO	PRM18-T6TP1
		NC	PRM18-T6TP2
		NO+NC	PRM18-T6TP
Specification parameters
Light source/Light source			860nm infrared modulated light
Working voltage			DC 12-24V (DC 10-30V) pulse (p-p) below 10%
Current consumption			≤20mA
control output Control output	Switch capacity Contact capacity		100mA at 30V (MAX: 200mA)
	residual voltage Residual voltage		NPN collector output, load voltage: 30V, current: ≤ 100mA, residual voltage below 1.5V. PNP collector output, load current: ≤ 100mA, output voltage: (power supply voltage -2V) or above.
Repeatability precision			＜5%
Response time/Response time			5ms
Action instructions			Red LED (green LED for the power indicator of the paired transmitter)
Protection function/Protection			Power reverse connection protection, surge absorption, output terminal short circuit protection
work environment Work ambient	Ambient illuminance Ambient Light		Sunlight: below 8000Lx, incandescent lamp: below 3000Lx (receiving surface illumination)
	operation temperature Roperating temperarure		-20~+65 ℃, during storage: -20~+80 ℃ (without freezing or condensation)
	Working humidity Ambient humidity		30～85％RH， Storage time: 35-95% RH
	insulation resistance Lnsulation resistance		All connection terminals to the casing, with a resistance of 20M Ω or higher, based on a DC500V megohmmeter
Protection level/Protection class			IEC specification IP66
Shell Material			Brass (nickel plating)+PC
Connection method/Conducting method			3-core PVC wire with a cross-sectional area of 0.3mm ², lead out type (standard wire length of 2m or customized according to requirements)