Low temperature incubator

Low temperature incubators are suitable for environmental protection, hygiene and epidemic prevention, drug testing, agriculture, animal husbandry, aquaculture and other scientific research, universities, and production departments. It is a specialized constant temperature equipment for water analysis and BOD determination, cultivation, preservation, plant cultivation, and breeding experiments of bacteria, fungi, and microorganisms.

1. Made of stainless steel inner liner, with four semi-circular corners, easy to clean. The spacing between shelves inside the box is adjustable, and the appearance is cold-rolled sheet spray painted. The door is made of 60mm polyurethane foam and has an observation window.

2. Microcomputer temperature controller, precise and reliable temperature control, LCD screen displays temperature and time.

3. The microcomputer automatically comes with a power-off memory function, allowing for automatic execution of unfinished programs without the need for manual operation when restarting.

4. International brand compressor, environmentally friendly refrigerant (R134a), high efficiency, low energy consumption, promoting energy conservation,

5. The shelves in the studio can be adjusted in height according to user requirements.

Note: The door can be selected with or without an observation window

Technical Specifications:

Capacity: 1500L

Temperature control range: 0-65 ℃ Temperature control resolution 0.1 ℃ fluctuation ± 0.5-1.0 ℃ Uniformity ± 1.0 ℃

Lighting: 7W

Size (mm): Inner container size: 1700 * 670 * 1280 External dimensions: 1800 * 790 * 1918

Heating time: 0 ℃ to 40 ℃ ≤ 60 minutes

Cooling time: 40 ℃ to 10 ℃ ≤ 100 minutes

Working hours: continuous cycle

Working environment: 0-30 ℃, humidity below 85% RH, no corrosive gases

Compressor delay protection time: 3 minutes.

Working mode: Continuous operation (intermittent operation of compressor)

Noise: ≤ 70db

Power requirement: 220V/50Hz.

Polyurethane foam door design, good insulation effect, small temperature fluctuations and other characteristics, stainless steel inner liner, appearance cold-rolled steel plate electrostatic spray anti rust treatment, corrosion-resistant.

Box partition: The height of the partition can be adjusted or disassembled at will.

Temperature regulation: gas sleeve temperature regulation system; The temperature sensor is a dual sensor to ensure the normal operation of the equipment, and the heating is calculated using PID fuzzy calculation.

Microcomputer fully automatic control, touch switch, easy to operate.

It has a power-off memory function, ensuring that the instrument can continue to operate from the breakpoint after power on.

LCD display screen, capable of displaying temperature, time, etc.

Temperature control method: The back air duct inside the box is used for circulating cooling, with uniform circulation and an air volume of 2m/s

Optional UV sterilization system: 10 watt UV disinfection lamp (optional).

Can be equipped with a printer or RS485 interface, can connect to a printer and computer, and can record changes in temperature and humidity parameters (optional)