Low temperature constant temperature water bath

Low temperature constant temperature water bathselectImported high-quality stainless steel plates and precision machining processes are manufactured, which have the characteristics of high temperature resistance and corrosion resistance. The temperature control adopts high temperature stability operational amplifiers and double integration high-precision A/D conversion technology, and is designed with far-infrared heating technology. Combined with magnetic stirring, the product has a short thermal equilibrium time, low temperature fluctuation, good uniformity, and accurate and intuitive LED display. Widely used for distillation, drying, concentration, and temperature preservation of chemical or biological products.

IItechnical indicators

Power supply: 220 50HZ

Heating power: 1500W

Temperature control range: Tr+5-100 ℃

Temperature control accuracy: ± 0.5 ℃

HH-420 Studio Capacity 420 × 180 × 135 (mm)

HH-600 Studio Capacity 600 × 300 × 180 (mm)

1. When using, water must be added to the tank first, the power switch should be turned on, and the indicator light should be on

2. Set temperature: Press the SET key to set or view the temperature set point. Press the SET key once and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again and the instrument will return to normal working state. The temperature setting is complete.

3. When the water temperature reaches the desired temperature, the heating indicator light will turn off. At this point, the heating has stopped working, and too much water should not be added to the tank to prevent water from overflowing outside the pot when boiling. It should also be noted that the water in the tank should not expose the electric heating tube to the water surface to avoid burning out the electric heating tube and causing water leakage.

1. This product uses 220V AC power, and the power supply adopts a three pin safety plug. One of the longest pins is the safety grounding pin, and the corresponding three pin socket should be properly grounded.

2. Due to the fluctuation of water temperature during heating in the sink, it is necessary to wait until the water temperature is stable when measuring with a thermometer.

3. There is a stainless steel metal tube between the heating tubes as a temperature sensor. Do not collide to avoid temperature control failure. (Note: It is prohibited to use a heater in a water free state in the sink)

4. If the sink is not used for a long time, the water in the studio sink should be drained, wiped clean with a soft cloth, and dried.