- Phone
-
Address
No. 79, Industrial Park, Zhuankou Economic Development Zone, Wuhan City
Product Categories
Hubei Hanli Machinery Equipment Co., Ltd
Liyuan plunger pump A2F56W6.1A2
NegotiableUpdate on 05/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Liyuan plunger pump A2F56W6.1A2 is commonly used in construction machinery, walking machinery and other equipment. This article mainly introduces the product model A2F56W6.1A2, an overview of the Liyuan plunger pump product, and its working principle.
Product Details
Liyuan plunger pump A2F56W6.1A2Structure and characteristics:
The pump is equipped with an axial conical piston rotor set designed with a slanted shaft, which is used for static hydraulic transmission in open circuits and can be used in fixed applications. The output flow rate of the pump is proportional to the transmission speed and displacement, and the design of the transmission shaft bearings can provide the expected service life in these working areas, with high power density, compact design, and high overall efficiency.
List of specifications for Liyuan plunger pump and related models:
A2F56W6.1A2
A2F56W6.1Z2
A2F125W6.1A2
A2F16R6.1B6
A2F45W6.1Z3
A2F80L6.1B5
A2F16R6.1P6
A2F180R6.1P5
A2F160R6.1P5
A2F125R6.1P5
A2F107R6.1P5
A2F90R6.1P5
A2F80R6.1P5
A2F63R6.1P5
A2F56R6.1P5
A2F12L6.1P5
A2F125W6.1B5
A2F63L6.1P5
A2F32W6.1Z3
A2F56L6.1Z6
A2F90L6.1Z5
A2F28R6.1Z5
A2F160W6.1B3
A2F32W6.1P1
The Dai You SL model is a heavy-duty ultra long life pump designed by Hubei Hanli Hydraulic Company for long-term operation under high pressure. The SL model pump adopts a static pressure balanced ultra long life heavy-duty bearing. Compared with the model pump, the 'SL' model pump has a longer service life and can work under high pressure for a long time. The soft life is 10000 hours at 31.5 MPa, nominal speed, and oil viscosity of 36 m ㎡/s. This pump is equipped with a U-port for flushing bearings.
Requirements for hydraulic oil used in A2F56W6.1A2 high-pressure source plunger pump: To ensure the performance and service life of the high-pressure source plunger pump, anti-wear hydraulic oil should be used for the hydraulic system. It is recommended to use N46 anti-wear hydraulic oil. The long-term working oil temperature should be within the range of 10 ℃ to 60 ℃. The oil tank design should adopt a sealed type, and the oil filter should be regularly cleaned and the oil quality checked. The working oil should be replaced according to the actual situation.
Product Features:
1Liyuan plunger pump A2F56W6.1A2Adopting Guangtai single axis CNC (or other CNC according to user requirements)
2. The feed motion is driven by an AC servo motor and driven by a ball screw;
3. Adopting plastic coated guide rails, it runs smoothly at low speeds without crawling or linear guide rail pairs.
