Characteristics of Liquid Corrosion Tester
The 7-inch large screen LCD display has the advantages of stability, reliability, easy operation, and easy maintenance. Applicable to GB/T 11143-2008 "Test Method for Rust Prevention Performance of Mineral Oil with Inhibitors in the Presence of Water". Test 4 sets of samples separately and time them separately. 4-channel high-performance brushless motor PID speed regulation, real-time display of speed. Adopting a 32-bit microprocessor as the main control core and a new generation intelligent operating system.
Adopting high-precision Pt100 temperature sensor, PID automatic temperature control, and real-time display of temperature curve.
High performance brushless motor, low noise, PID automatic speed regulation, real-time display of speed.
4 samples can be tested simultaneously or separately, and the test parameters can be set separately for 4 sets of test channels.
● Equipped with overheat protection to ensure the safety of the laboratory during nighttime operations.
The screen saver mode that can be set arbitrarily is more energy-efficient and extends the lifespan of the screen.
Equipped with a USB interface, it can upgrade firmware and upload experimental data.
Technical indicators of liquid-phase corrosion tester
● Temperature control method: digital PID control method
Temperature measurement: Pt100 platinum resistor, 1/3B grade.
● Temperature control range: Room temperature~100 ℃
Temperature control accuracy: ± 0.2 ℃
Mixing speed: 1000 ± 20r/min
Test quantity: 4
● Timing range: 1 minute to 99 hours and 59 minutes
Timing accuracy: ≤ 0.1 s
Rated power: 1500W
● Dimensions: 960 × 450 × 700 (mm)
Weight: 30 kg
【 Precautions 】

This instrument is a precision testing instrument, and the success or failure of the experiment and the accuracy of the test results depend on various factors, as well as the careful operation of the experimenter. The following precautions remind experimenters to be very careful during operation.