Liquefied petroleum gas density measuring instrument

YT-0221Liquefied petroleum gas density measuring instrument

YT-0221Liquefied petroleum gas density measuring instrumentAdaptation standards: SH/T0221, ASTMD1657, ISO3993

This instrument is suitable for measuring the density of liquefied petroleum gas and light hydrocarbons. At the test temperature, samples with a vapor pressure (gauge pressure) higher than 1.4 MPa should not use this instrument.

Technical Specifications

Mixing motor power: 15W

2. Mixing motor speed: 1250r/min

Heating power: 1800W

4. Compressor power: 280W

5. Temperature control accuracy: 15 ± 0.2 ℃ or 20 ± 0.2 ℃

Cylinder bearing pressure:>1.4Mpa

7. Environmental temperature: 5 ℃~45 ℃ Relative humidity: ≤ 85%

Working power supply: AC220V ± 10%, 50Hz

9. Dimensions: 700mm × 450mm × 800mm

Weight: 40kg

Instrument Features

1. All three valves are made of 1Cr18Ni9Ti material and can withstand a pressure of 4Mpa.

2. The cylinder is made of transparent organic glass and sealed at both ends with metal end plates and chloroprene rubber gaskets.

3. The water bath is made of 1Cr18Ni9Ti material, equipped with an electric heater and electric stirring device, and a temperature automatic adjustment system, which can meet the test temperature of 15 ± 0.2 ℃ or 20 ± 0.2 ℃.

4. The temperature control device adopts digital display, with sensitive response and accurate temperature control.

5. The mixer consists of a motor, a mixing shaft, and blades, with low noise and high efficiency.

6. The refrigeration method adopts compressor refrigeration.

Shanghai Yutong Instrument Factory mainly engages in oil product analysis instruments, such as kinematic viscosity tester, flash point tester, trace moisture tester, oil contamination tester, acid value tester, demulsification tester, foam characteristic tester, pour point tester, oxidation stability tester, density tester, spontaneous ignition point tester, insulation oil withstand voltage tester, distillation range tester, chlorine content tester, trace carbon residue tester, apparent viscosity tester, mechanical impurity tester, freezing point tester, water quality analyzer and other laboratory instruments, with a wide range of varieties and models. Welcome to your consultation.