Leather atomization tester

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather Atomizer

FT-F1 Fogging Tester,Automotive interior inspection equipment,The use of automotive leather atomizer:

Used for evaluating the evaporation of volatile components of interior materials such as plastic parts, polyurethane, textiles, leather, adhesives, non-woven fabrics, thermoplastic elastomers, etc. for automobiles, aircraft, etc. at high temperatures. It can also be used for determining the high-temperature atomization phenomenon of xenon lamps in front of vehicles. Satisfy: DIN 75201、ISO 6452、SAE J1756、QB/T 2728、BS EN 14288、 PV 3920、PV 3015、ES-X83231、NES M0161、D45 1727、GM 9305P

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather Atomizerproductcharacteristic

Design with 6 test positions, capable of conducting both sample testing and blank testing simultaneously

Stable operation and accurate data

High precision temperature control

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather AtomizerTesting Principles

The sample is heated in the fogging cup and begins to evaporate, and the volatile gas condenses on the glass plate or aluminum foil that has been cooled in the cooling chamber. After the condensation process is completed, remove the glass plate or aluminum foil, measure the atomization value or weight of the condensation component of the glass plate or aluminum foil, and compare it with the data before condensation to obtain the atomization volatilization characteristics of the sample.

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather AtomizerThree measurement methods:

Glossiness method: The gas evaporated by heating the sample in the fogging cup condenses on a low-temperature glass plate. By comparing and calculating the glossiness values of the glass plate before and after condensation, the fogging value of the sample can be obtained. (Standard)

Haze method: The gas evaporated by heating the sample in the fogging cup condenses on a low-temperature glass plate. By comparing and calculating the haze values of the glass plate before and after condensation, the haze value of the sample can be obtained. (Purchase separately)

Weight method: The gas evaporated by heating the sample in the fogging cup condenses on the low-temperature aluminum foil. By measuring the weight change of the aluminum foil before and after condensation, the weight of the atomized condensed substance of the sample can be obtained. (Standard, balance purchased separately)

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather Atomizerstructure

It mainly consists of a high-temperature constant temperature bath, a low-temperature constant temperature bath, a cooling plate, a fogging cup, a fogging glass plate, a measuring meter, a sampler, and accessories, which can complete the testing process such as sampling, heating, condensation, and testing.

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather AtomizerOperation steps

Prepare the sample → Open the high and low temperature bath and reach the set temperature → Clean the fogging cup and fogging glass plate → Place the sample → Place the fogging glass plate or aluminum foil → Place the cooling chamber → Maintain the set temperature of both tanks and operate normally for the required test time → Remove the glass plate or aluminum foil and place it for the specified time → Measure the glossiness, haze, or weight of the glass plate or aluminum foil → Compare the data and obtain the final result

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather AtomizerTECHNICAL INDEX

High temperature tank temperature range: room temperature~150 ℃ (purchased separately from room temperature to 280 ℃)

Temperature control accuracy of high temperature tank: ±0.1℃（150℃）

Low temperature tank temperature range: 0-100 ℃

Temperature control accuracy of low-temperature tank: ±0.1℃

Dimensions of high temperature tank:670 mm（L）×490 mm（B）×540 mm（H）

Dimensions of Low Temperature Tank:400 mm（L）×220 mm（B）×520 mm（H）

Net weight of high-temperature tank:32kg (excluding thermal conductive medium)

Net weight of low-temperature tank:15kg (excluding thermal conductive medium)

Power supply: AC 220V 50Hz

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather AtomizerStandard configuration:

Host, thermostat controller, sample ring, beaker, fluororubber sealing ring, rubber ring fixing ring, square glass plate, circular glass plate, aluminum foil, aluminum foil sampler, cover plate, glass plate holder, sampler, thermal oil, dioctyl phthalate (DOP), accessory hanger

FT-F1 Fogging Tester,Automotive interior inspection equipment,Automotive Leather AtomizerOptional parts:

Haze meter, glossiness meter, electronic balance (0.01mg)